50 Best Custom Apes

 

12 PHATTY MERC 1-12 CUSTOM APES FOR VICTORY 8 Ball Highball hammer KING PIN

12″ PHATTY MERC 1-1/2 CUSTOM APES FOR VICTORY 8 Ball, Highball, hammer, KING PIN

12″ PHATTY MERC 1-1/2 CUSTOM APES FOR VICTORY 8 Ball, Highball, hammer, KING PIN - 100% tig welded. 120 wall thickness. 12″ phatty merc custom handlebars for victory 8 ball, highball, hammer, gunner, judge, 1 1/2 tubing stepped down to 1 inch tubing for hand control,.   Pre drilled for wiring, these come powder coat glossy or satin black, please let us know what finish you would like,  these are fmb choppers own design and there a great feel and look, 34 inch bar tip to bar tip, 12 inch up rise, 9 inch bottom inside, 10 of pullback, we can make these any rise or pullback at no additional charge.

 

14 RG15 MENACING BARS CUSTOM APE HANGER FOR 2015 2016 ROAD GLIDE

14″ RG15 MENACING BARS CUSTOM APE HANGER FOR 2015, 2016 ROAD GLIDE

14″ RG15 MENACING BARS CUSTOM APE HANGER FOR 2015, 2016 ROAD GLIDE - 100% tig welded. Rg15 menacing bars custom ape hanger for 2015, 2016 road glide, designed for the new 1-1/4 risers,we added a slot for the pin in the risers so theres adjustment forward and back on the bars (though its very easy to tap the pin down into the riser)1 1/4″ tubing stepped down to 8.   Pre drilled for wiring, these come powder coat glossy or satin black • please let us know what finish you would like,  these are fmb choppers own design and there a great feel and look ,37″ bar tip to bar tip, 14″ up rise, 11-1/2″ bottom inside, 7″ of pullback, we can make these any rise or pullback at no additional charge. 50″ of 1″ tubing for hand controls, notched for throttle by wire,. 120 wall thickness.

 

FMB 15GK14FMB 14 Gorilla Killer Bars Custom Ape Hanger For 2015 Road Glide

FMB 15GK14FMB 14″ Gorilla Killer Bars Custom Ape Hanger For 2015 Road Glide

FMB 15GK14FMB 14″ Gorilla Killer Bars Custom Ape Hanger For 2015 Road Glide -   Pre drilled for wiring these come powder coat glossy or satin black please let us know what finish you would like(if you do not like the spikes on top we can replace them with beveled caps)  these are fmb choppers own design and there a great feel and look 34″ bar tip to bar tip 14″ up rise 11-1/2″ bottom inside 6″ of pullback. 100% tig welded. 14″ gorilla killer bars for 2015 harley road glides designed for the new 1-1/4 riserswe added a slot for the pin in the risers so theres adjustment forward and back on the bars 1 1/4″ tubing stepped down to 8. 50″ of 1″ tubing for hand controlsnotched for throttle by wire. 120 wall thickness.

 

14 Reaper Bars Custom Ape Hanger For 2015 AND UP Harley Road glide

14″ Reaper Bars Custom Ape Hanger For 2015 AND UP Harley Road glide

14″ Reaper Bars Custom Ape Hanger For 2015 AND UP Harley Road glide - 120 wall thickness. 50″ of 1″ tubing for hand controlsnotched for throttle by wire.  These are fmb choppers own design and there a great feel and look 36″ bar tip to bar tip 14″ up rise 11-1/2″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge3 days to ship raw, 5-6 days to ship powdercoat.   pre drilled for wiring these come powder coat glossy or satin black please let us know what finish you would like. One of our most popular bars now fit the 2015 harley road glides 14″ reaper bars for 2015 harley road glides designed for the new 1-1/4 risers we added a slot for the pin in the risers so theres adjustment forward and back on the bars, 1 1/4″ tubing stepped down to 8. 100% tig welded.

 

FMB HB12FMB 12 Hellbent Narrow Bars Custom Ape Hangers Handlebars

FMB HB12FMB 12″ Hellbent Narrow Bars Custom Ape Hangers Handlebars

FMB HB12FMB 12″ Hellbent Narrow Bars Custom Ape Hangers Handlebars - 120 wall thickness. Fmb choppers custom 12″ hellbent narrow ape hangers these are for standard trees 3.    They are fmb choppers own design and there a great feel and look for any bike 33″ bar tip to bar tip 12″ up rise 7. 5″ of pullback 7″ of 1″ tubing inside center for risers 1 1/4″ tapered down for master cylinder relief 7 1/4″ of 1″ tubing for controls. These are 100% tig welded. 5 center to center are pre drilled for wiring these come powdercoated glossy or satin black 1 1/4″ tubing stepped down to 1″  tubing with a.

 

FMB GKM16FMB 16 Gorilla Killers Custom Ape Hanger For Harley Road Glide

FMB GKM16FMB 16″ Gorilla Killers Custom Ape Hanger For Harley Road Glide

FMB GKM16FMB 16″ Gorilla Killers Custom Ape Hanger For Harley Road Glide - 100% tig welded. 120 wall thickness. 16″ gorilla killers custom ape hanger for harley road glideavailable with beveled caps on top (like pictured)or spikes please specify when ordering knurled for standard risers 3. 5 center to center 1 1/4″ tubing stepped down to 7.   pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 34″ bar tip to bar tip 16″ up rise 8″ bottom inside 10-1/2″ bottom outside 6″ of pullback. 25″ of 1″ tubing for hand controlsnotched for throttle by wire.

 

16 PHATTY MERCS 1-12 CUSTOM APE HANGER FOR 2015 UP HARLEY ROAD GLIDE

16″ PHATTY MERCS 1-1/2 CUSTOM APE HANGER FOR 2015 UP HARLEY ROAD GLIDE

16″ PHATTY MERCS 1-1/2 CUSTOM APE HANGER FOR 2015 UP HARLEY ROAD GLIDE - 16″ phatty mercs 1-1/2 custom ape hanger for 2015 and up harley road glides , designed for the new 1-1/4 riserswe added a slot for the pin in the risers so theres adjustment forward and back on the bars, 1 1/2″ tubing stepped down to 8. 100% tig welded. 120 wall thickness. 5 of pullback, we can make these any rise or pullback at no additional charge. 50″ of 1″ tubing for hand controls, notched for throttle by wire.   Pre drilled for wiring, these come powder coat glossy or satin black , please let us know what finish you would like,  these are fmb choppers own design and there a great feel and look 36 inches bar tip to bar tip, 16 inch up rise 11 inch bottom inside 11.

 

16 MAYHEM BARS CUSTOM APE HANGER HANDLEBARS For HARLEY STREET GLIDES

16″ MAYHEM BARS CUSTOM APE HANGER HANDLEBARS For HARLEY STREET GLIDES

16″ MAYHEM BARS CUSTOM APE HANGER HANDLEBARS For HARLEY STREET GLIDES - 16″ mayhem bars custom ape hanger handlebars for harley street glides, fits 2013 and below, check out our razor back line for 2014’s and up, knurled for standard risers 3. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 5 center to center 1 1/4″ tubing stepped down to 7. 120 wall thickness.   Pre drilled for wiring we will powder coat glossy, these are fmb choppers own design and there a great feel and look 37″ bar tip to bar tip 16″ up rise 14-1/2″ bottom inside 17″ bottom outside 8″ of pullback, we can make these any rise or pullback at no additional charge 3 days to ship raw, 5-6 days to ship powdercoat. 6″ of 1″ tubing inside center for risers 100% tig welded.

 

10 Reaper Monkey Bars Custom Ape Hanger Handlebars 4 Harley Street Glides

10″ Reaper Monkey Bars Custom Ape Hanger Handlebars 4 Harley Street Glides

10″ Reaper Monkey Bars Custom Ape Hanger Handlebars 4 Harley Street Glides - 10″ reaper bars custom ape hanger handlebars for harley street glides (these will not fit 2014’s and up)knurled for standard risers 3. 5″ bar tip to bar tip 10″ up rise 14-5/8″ bottom inside 17″ bottom outside 6″ of pullback. 6″ of 1″ tubing inside center for risers100% tig welded. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 120 wall thickness. 5 center to center 1 1/4″ tubing stepped down to 7.   Pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 34.

 

16 RG15 LONG HORN 1-12 PHATTY BARS CUSTOM APE HANGER FOR 2015 2016 ROAD GLIDE

16″ RG15 LONG HORN 1-1/2 PHATTY BARS CUSTOM APE HANGER FOR 2015, 2016 ROAD GLIDE

16″ RG15 LONG HORN 1-1/2 PHATTY BARS CUSTOM APE HANGER FOR 2015, 2016 ROAD GLIDE - 16″ rg15 long horn phatty 1-1/2 custom ape hanger for 2015, 2016 road glide, designed for the new 1-1/4 risers we added a slot for the pin in the risers so theres adjustment forward and back on the bars (though its very easy to tap the pin down into the riser) 1 1/2″ tubing stepped down to 8. 120 wall thickness. 50″ of 1″ tubing for hand controls notched for throttle by wire.   These come powder coat glossy or satin black please let us know what finish you would like these are fmb choppers own design and there a great feel and look , 36″ bar tip to bar tip 16″ up rise 11″ bottom inside 9″ of pullback we can make these any rise or pullback at no additional charge. 100% tig welded.

 

12 PHATT REAPER PHATTY BARS 1-12 CUSTOM APE HANGER FOR 2015 ROAD GLIDE

12″ PHATT REAPER PHATTY BARS 1-1/2 CUSTOM APE HANGER FOR 2015 ROAD GLIDE

12″ PHATT REAPER PHATTY BARS 1-1/2 CUSTOM APE HANGER FOR 2015 ROAD GLIDE -   Pre drilled for wiring these come powder coat glossy or satin black ,please let us know what finish you would like.  These are fmb choppers own design and there a great feel and look 36″ bar tip to bar tip, 12″ up rise 11-1/2″ bottom inside 8″ of pullback we can make these any rise or pullback at no additional charge, 3 days to ship raw, 5-6 days to ship powdercoat. 120 wall thickness. 100% tig welded. 12″ phatt reaper bars for 2015 harley road glides designed for the new 1-1/4 risers we added a slot for the pin in the risers so theres adjustment forward and back on the bars, 1 1/2″ tubing stepped down to 1″ tubing for hand controls notched for throttle by wire.

 

FMB RKM13FMB 13 Reaper King Bars Custom Ape Hanger Handlebars 4 Harley Road Kings

FMB RKM13FMB 13″ Reaper King Bars Custom Ape Hanger Handlebars 4 Harley Road Kings

FMB RKM13FMB 13″ Reaper King Bars Custom Ape Hanger Handlebars 4 Harley Road Kings - 5″ bottom outside 6″ of pullback.   pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 32″ bar tip to bar tip 13″ up rise 11″ bottom inside 13. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 6″ of 1″ tubing inside center for risers100% tig welded. 5 center to center 1 1/4″ tubing stepped down to 7. 13″ reaper king bars custom ape hanger handlebars for harley road kings/glides knurled for standard risers 3. 120 wall thickness.

 

16 MENACING BARS CUSTOM APE HANGER HANDLEBARS 4 HARLEY ROAD GLIDES

16″ MENACING BARS CUSTOM APE HANGER HANDLEBARS 4 HARLEY ROAD GLIDES

16″ MENACING BARS CUSTOM APE HANGER HANDLEBARS 4 HARLEY ROAD GLIDES - 25″ of 1″ tubing for hand controls notched for throttle by wire. 6″ of 1″ tubing inside center for risers 100% tig welded. Pre drilled for wiring these come powder coated glossy or satin black  these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 16″ up rise 8″ bottom inside 6″ of pullback we can make these any rise or pullback at no additional charge. 120 wall thickness. 16″ menacing bars custom ape hanger handlebars fits 2013 and below, harley road glides and road kings knurled for standard risers 3. 5 center to center 1 1/4″ tubing stepped down to 7.

 

FMB GKM14FMB 14 Gorilla Killers Custom Ape Hanger For Harley Road Glide

FMB GKM14FMB 14″ Gorilla Killers Custom Ape Hanger For Harley Road Glide

FMB GKM14FMB 14″ Gorilla Killers Custom Ape Hanger For Harley Road Glide - 100% tig welded. 25″ of 1″ tubing for hand controlsnotched for throttle by wire.   Pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 34″ bar tip to bar tip 14″ up rise 8″ bottom inside 10-1/2″ bottom outside 6″ of pullback. 14″ gorilla killers custom ape hanger for harley road glideavailable with beveled caps on top (like pictured)or spikes please specify when ordering knurled for standard risers 3. 120 wall thickness. 5 center to center 1 1/4″ tubing stepped down to 7.

 

FMB 15GK12FMB 12 Gorilla Killer Bars Custom Ape Hanger For 2015 Road Glide

FMB 15GK12FMB 12″ Gorilla Killer Bars Custom Ape Hanger For 2015 Road Glide

FMB 15GK12FMB 12″ Gorilla Killer Bars Custom Ape Hanger For 2015 Road Glide - 12″ gorilla killer bars for 2015 harley road glides designed for the new 1-1/4 riserswe added a slot for the pin in the risers so theres adjustment forward and back on the bars 1 1/4″ tubing stepped down to 8.   pre drilled for wiring these come powder coat glossy or satin black please let us know what finish you would like(if you do not like the spikes on top we can replace them with beveled caps)  these are fmb choppers own design and there a great feel and look 34″ bar tip to bar tip 12″ up rise 11-1/2″ bottom inside 6″ of pullback. 50″ of 1″ tubing for hand controlsnotched for throttle by wire. 100% tig welded. 120 wall thickness.

 

FMB SM10FMB 10 Skunky Custom Ape Hanger For Harley Road Glide

FMB SM10FMB 10″ Skunky Custom Ape Hanger For Harley Road Glide

FMB SM10FMB 10″ Skunky Custom Ape Hanger For Harley Road Glide - Put a little stank on your road glide 10″ skunky custom ape hanger for harley road glide knurled for standard risers 3. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 120 wall thickness. 100% tig welded. 5 center to center 1 1/4″ tubing stepped down to 7.   Pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 33-1/2″ bar tip to bar tip 10″ up rise 8″ bottom inside 10-1/2″ bottom outside 6″ of pullback.

 

16 Reaper Bars Custom Ape Hanger Handlebars 4 Harley Street Glides

16″ Reaper Bars Custom Ape Hanger Handlebars 4 Harley Street Glides

16″ Reaper Bars Custom Ape Hanger Handlebars 4 Harley Street Glides - 120 wall thickness. 5″ bar tip to bar tip 16″ up rise 14-5/8″ bottom inside 17″ bottom outside 6″ of pullback. 6″ of 1″ tubing inside center for risers100% tig welded. 5 center to center 1 1/4″ tubing stepped down to 7. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 16″ reaper bars custom ape hanger handlebars for harley street glides (these will not fit 2014’s and up)knurled for standard risers 3.   pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 34.

 

14 PHATT REAPER PHATTY BARS 1-12 CUSTOM APE HANGER FOR 2015 ROAD GLIDE

14″ PHATT REAPER PHATTY BARS 1-1/2 CUSTOM APE HANGER FOR 2015 ROAD GLIDE

14″ PHATT REAPER PHATTY BARS 1-1/2 CUSTOM APE HANGER FOR 2015 ROAD GLIDE -  these are fmb choppers own design and there a great feel and look 36″ bar tip to bar tip, 14″ up rise 11-1/2″ bottom inside 8″ of pullback we can make these any rise or pullback at no additional charge, 3 days to ship raw, 5-6 days to ship powdercoat. 120 wall thickness. 100% tig welded.   Pre drilled for wiring these come powder coat glossy or satin black ,please let us know what finish you would like. 14″ phatt reaper bars for 2015 harley road glides designed for the new 1-1/4 risers we added a slot for the pin in the risers so theres adjustment forward and back on the bars, 1 1/2″ tubing stepped down to 1″ tubing for hand controls notched for throttle by wire.

 

14 HELLBENT BREAKOUT BARS CUSTOM APE HANGERS FOR HARLEY BREAKOUTS

14″ HELLBENT BREAKOUT BARS CUSTOM APE HANGERS FOR HARLEY BREAKOUTS

14″ HELLBENT BREAKOUT BARS CUSTOM APE HANGERS FOR HARLEY BREAKOUTS - These are 100% tig welded.    They are fmb choppers own design and there a great feel and look for any bike , 33″ bar tip to bar tip 12″ up rise, 7. 14″ hellbent breakout bars custom ape hangers for harley breakouts, 14″ rise bars on bike pictured,these will fit all harley breakouts with 1-1/4 riser sections, pre drilled for wiring, these come powdercoated glossy or satin black, (let us know your choice) 1- 1/4″ tubing stepped down to 1″  tubing with a. 5″ of pullback, 8″ of 1-1/4″ tubing inside center for risers, 7 1/4″ of 1″ tubing for controls, we can make these any rise or pullback at no additional charge. 120 wall thickness.

 

12 MAYHEM BARS CUSTOM APE HANGER HANDLEBARS For HARLEY STREET GLIDES

12″ MAYHEM BARS CUSTOM APE HANGER HANDLEBARS For HARLEY STREET GLIDES

12″ MAYHEM BARS CUSTOM APE HANGER HANDLEBARS For HARLEY STREET GLIDES - 120 wall thickness. 6″ of 1″ tubing inside center for risers 100% tig welded.   Pre drilled for wiring we will powder coat glossy, these are fmb choppers own design and there a great feel and look 37″ bar tip to bar tip 12″ up rise 14-1/2″ bottom inside 17″ bottom outside 8″ of pullback, we can make these any rise or pullback at no additional charge 3 days to ship raw, 5-6 days to ship powdercoat. 5 center to center 1 1/4″ tubing stepped down to 7. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 12″ mayhem bars custom ape hanger handlebars for harley street glides, fits 2013 and below, check out our razor back line for 2014’s and up, knurled for standard risers 3.

 

12 RG15 EL MONSTER BARS 1-12 CUSTOM APE HANGER FOR 2015-UP ROAD GLIDE

12″ RG15 EL MONSTER BARS 1-1/2 CUSTOM APE HANGER FOR 2015-UP ROAD GLIDE

12″ RG15 EL MONSTER BARS 1-1/2 CUSTOM APE HANGER FOR 2015-UP ROAD GLIDE -   Pre drilled for wiring, these come powder coat glossy or satin black , please let us know what finish you would like,  these are fmb choppers own design and there a great feel and look 36″ bar tip to bar tip, 12″ up rise, 11″ bottom inside 9″ of pullback, we can make these any rise or pullback at no additional charge. Rg15 el monster phatty 1-1/2 custom ape hanger for 2015, 2016 road glide , designed for the new 1-1/4 risers, we added a slot for the pin in the risers so theres adjustment forward and back on the bars (though its very easy to tap the pin down into the riser) 1 1/2″ tubing stepped down to 8. 100% tig welded. 50″ of 1″ tubing for hand controls notched for throttle by wire,. 120 wall thickness.

 

FMB SM16FMB 16 Skunky Custom Ape Hanger For Harley Road Glide

FMB SM16FMB 16″ Skunky Custom Ape Hanger For Harley Road Glide

FMB SM16FMB 16″ Skunky Custom Ape Hanger For Harley Road Glide - 100% tig welded.   Pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 33-1/2″ bar tip to bar tip 16″ up rise 8″ bottom inside 10-1/2″ bottom outside 6″ of pullback. 120 wall thickness. 5 center to center 1 1/4″ tubing stepped down to 7. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. Put a little stank on your road glide 16″ skunky custom ape hanger for harley road glide knurled for standard risers 3.

 

FMB RM14FMB 14 Reaper Monkey Bars Custom Ape Hanger Handlebars 4 Harley Street Glides

FMB RM14FMB 14″ Reaper Monkey Bars Custom Ape Hanger Handlebars 4 Harley Street Glides

FMB RM14FMB 14″ Reaper Monkey Bars Custom Ape Hanger Handlebars 4 Harley Street Glides -   Pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 34. 14″ reaper bars custom ape hanger handlebars for harley street glides (these will not fit 2014’s and up)knurled for standard risers 3. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 5 center to center 1 1/4″ tubing stepped down to 7. 6″ of 1″ tubing inside center for risers100% tig welded. 5″ bar tip to bar tip 14″ up rise 14-5/8″ bottom inside 17″ bottom outside 6″ of pullback. 120 wall thickness.

 

FMB RKM16FMB 16 Reaper King Bars Custom Ape Hanger Handlebars 4 Harley Road Kings

FMB RKM16FMB 16″ Reaper King Bars Custom Ape Hanger Handlebars 4 Harley Road Kings

FMB RKM16FMB 16″ Reaper King Bars Custom Ape Hanger Handlebars 4 Harley Road Kings - 120 wall thickness. 5″ bottom outside 6″ of pullback. 6″ of 1″ tubing inside center for risers100% tig welded.   Pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 32″ bar tip to bar tip 16″ up rise 11″ bottom inside 13. 16″ reaper king bars custom ape hanger handlebars for harley road kings/glides knurled for standard risers 3. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 5 center to center 1 1/4″ tubing stepped down to 7.

 

HANDLEBARS RISE 10 4 HARLEY FXST XL FLST SPORTSTER CUSTOM APE HANGER 1

HANDLEBARS RISE 10″ 4 HARLEY FXST XL FLST SPORTSTER CUSTOM APE HANGER 1″

HANDLEBARS RISE 10″ 4 HARLEY FXST XL FLST SPORTSTER CUSTOM APE HANGER 1″ - 34-1/2″ wide from tip to tip. 10″ rise 1″ handlebars fits harley models models 96-14 with standard 1″ bars 3. 3-1/2 on-center knurling for firm mounting. Add period-style bobber ape-hanger handlebars to your ride bars are knurled, slotted and drilled for internal wiring stylish multi-hole drilled corner gussets offer strength and rigidity hand tig welded standard 1″ bars have 3 1/2″ on-center knurling feature chrome billet end caps 1 1/4″ king ape bars have 1 1/4″ diameter upright tubes but are stepped down to 1″ diameter to allow use of stock bar mounts and/or hand controls not for throttle-by-wire applications. Center section and tips taper to 1″ so that standard handlebar controls fit. 5 on center knurling ( excluding springers, fxs, and batwing models and 15″ road glide) black powder coated chrome 10″ rise. 1″-diameter.

 

12 MONKEY MAYHEM MINI CUSTOM APE HANGER HANDLEBARS 4 HARLEY ROAD GLIDES

12″ MONKEY MAYHEM MINI CUSTOM APE HANGER HANDLEBARS 4 HARLEY ROAD GLIDES

12″ MONKEY MAYHEM MINI CUSTOM APE HANGER HANDLEBARS 4 HARLEY ROAD GLIDES - 120 wall thickness. 6″ of 1″ tubing inside center for risers 100% tig welded.   Pre drilled for wiring these come powder coat glossy or satin black, these are fmb choppers own design and there a great feel and look 31″ bar tip to bar tip 12″ up rise 8″ bottom inside 10. 25″ of 1″ tubing for hand controls notched for throttle by wire. 12″ mayhem mini custom ape hanger handlebars for harley road glides fits 2014 and below knurled for standard risers 3. 5 center to center1 1/4″ tubing stepped down to 7. 5″ bottom outside 7″ of pullback we can make these any rise or pullback at no additional charge.

 

CUSTOM APE HANGER 1 HANDLEBARS RISE 14 4 HARLEY HARLEY FXST XL FLST SPORTSTER

CUSTOM APE HANGER 1″ HANDLEBARS RISE 14″ 4 HARLEY HARLEY FXST XL FLST SPORTSTER

CUSTOM APE HANGER 1″ HANDLEBARS RISE 14″ 4 HARLEY HARLEY FXST XL FLST SPORTSTER - 1″-diameter. Come with drilled wiring holes. 34-1/2″ wide from tip to tip. Center section and tips taper to 1″ so that standard handlebar controls fit. 3-1/2 on-center knurling for firm mounting. 5 on center knurling ( excluding springers, fxs, and batwing models and 15″ road glide) triple plated chrome 14″ rise. Description 14″ rise 1″ handlebars fits harley models models 96-14 with standard 1″ bars 3.

 

FMB GKM10FMB 10 Gorilla Killers Custom Ape Hanger For Harley Road Glide

FMB GKM10FMB 10″ Gorilla Killers Custom Ape Hanger For Harley Road Glide

FMB GKM10FMB 10″ Gorilla Killers Custom Ape Hanger For Harley Road Glide - 120 wall thickness. 100% tig welded. 5 center to center 1 1/4″ tubing stepped down to 7.   Pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 34″ bar tip to bar tip 10″ up rise 8″ bottom inside 10-1/2″ bottom outside 6″ of pullback. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 10″ gorilla killers custom ape hanger for harley road glideavailable with beveled caps on top (like pictured)or spikes please specify when ordering knurled for standard risers 3.

 

CUSTOM APE HANGER RISE 8 HANDLEBARS 4 HARLEY FXST XL FLST SPORTSTER

CUSTOM APE HANGER RISE 8″ HANDLEBARS 4 HARLEY FXST XL FLST SPORTSTER

CUSTOM APE HANGER RISE 8″ HANDLEBARS 4 HARLEY FXST XL FLST SPORTSTER - 1″-diameter. 3-1/2 on-center knurling for firm mounting. Add period-style bobber ape-hanger handlebars to your ride bars are knurled, slotted and drilled for internal wiring stylish multi-hole drilled corner gussets offer strength and rigidity hand tig welded standard 1″ bars have 3 1/2″ on-center knurling feature chrome billet end caps 1 1/4″ king ape bars have 1 1/4″ diameter upright tubes but are stepped down to 1″ diameter to allow use of stock bar mounts and/or hand controls not for throttle-by-wire applications. 5 on center knurling ( excluding springers, fxs, and batwing models and 15″ road glide) triple plated chrome 8″ rise. 34-1/2″ wide from tip to tip. Desription 8″ rise 1″ handlebars fits harley models models 96-14 with standard 1″ bars 3.

 

12 SPIKELESS BEND BARS CUSTOM APE HANGER HARLEY HANDLEBARS FOR ROAD GLIDES

12″ SPIKELESS BEND BARS CUSTOM APE HANGER HARLEY HANDLEBARS FOR ROAD GLIDES

12″ SPIKELESS BEND BARS CUSTOM APE HANGER HARLEY HANDLEBARS FOR ROAD GLIDES -   They are fmb choppers own design and there a great feel and look for any bike , 30″ bar tip to tip, 12″ up rise, 6″ of pullback, 8″ center, 7 1/2″ of 1″ tubing for controls. 5 center to center, pre drilled for wiring, 1 1/4″ tubing with a dom. 120 wall thickness. These are 100% tig welded. We can make these any rise or pullback at no additional charge, 3 days to ship raw, 5-6 days to ship powdercoat , 12″ spikeless bend bar, made in the usa, powder coated glossy or satin black, please let us know your choice, these are for standard trees 3.

 

FMB SM12FMB 12 Skunky Custom Ape Hanger For Harley Road Glide

FMB SM12FMB 12″ Skunky Custom Ape Hanger For Harley Road Glide

FMB SM12FMB 12″ Skunky Custom Ape Hanger For Harley Road Glide - 5 center to center 1 1/4″ tubing stepped down to 7.   Pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 33-1/2″ bar tip to bar tip 12″ up rise 8″ bottom inside 10-1/2″ bottom outside 6″ of pullback. Put a little stank on your road glide 12″ skunky custom ape hanger for harley road glide knurled for standard risers 3. 120 wall thickness. 100% tig welded. 25″ of 1″ tubing for hand controlsnotched for throttle by wire.

 

14 MAYHEM BARS CUSTOM APE HANGER HANDLEBARS For HARLEY STREET GLIDES

14″ MAYHEM BARS CUSTOM APE HANGER HANDLEBARS For HARLEY STREET GLIDES

14″ MAYHEM BARS CUSTOM APE HANGER HANDLEBARS For HARLEY STREET GLIDES - 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 120 wall thickness. 6″ of 1″ tubing inside center for risers 100% tig welded. 5 center to center 1 1/4″ tubing stepped down to 7.   Pre drilled for wiring we will powder coat glossy, these are fmb choppers own design and there a great feel and look 37″ bar tip to bar tip 14″ up rise 14-1/2″ bottom inside 17″ bottom outside 8″ of pullback, we can make these any rise or pullback at no additional charge 3 days to ship raw, 5-6 days to ship powdercoat. 14″ mayhem bars custom ape hanger handlebars for harley street glides, fits 2013 and below, check out our razor back line for 2014’s and up, knurled for standard risers 3.

 

FMB 15SS12FMB 12 Sinister Spike Bars Custom Ape Hanger For 2015 Road Glide

FMB 15SS12FMB 12″ Sinister Spike Bars Custom Ape Hanger For 2015 Road Glide

FMB 15SS12FMB 12″ Sinister Spike Bars Custom Ape Hanger For 2015 Road Glide -   Pre drilled for wiring these come powder coat glossy or satin black please let us know what finish you would like(if you do not like the spikes on top we can replace them with beveled caps)  these are fmb choppers own design and there a great feel and look 36″ bar tip to bar tip 12″ up rise 11-1/2″ bottom inside 6″ of pullback. 120 wall thickness. 100% tig welded. 50″ of 1″ tubing for hand controlsnotched for throttle by wire. 12″ sinister spike bars for 2015 harley road glides designed for the new 1-1/4 riserswe added a slot for the pin in the risers so theres adjustment forward and back on the bars 1 1/4″ tubing stepped down to 8.

 

10 HELLBENT SG BAR CUSTOM APE HANGER HANDLEBARS FOR HARLEY STREET GLIDE

10″ HELLBENT SG BAR CUSTOM APE HANGER HANDLEBARS FOR HARLEY STREET GLIDE

10″ HELLBENT SG BAR CUSTOM APE HANGER HANDLEBARS FOR HARLEY STREET GLIDE - 10″ hellbent sg bar custom apehanger, (fit 2013 and below harley street glides), for 2014 and up please look at our razor back monkey line of bars, made in the usa (handlebars are shipped primered, we will powder coat glossy or flat black for an additional $59. These are 100% tig welded. 00 these are for standard trees 3. 120 wall thickness. 5 center to center, pre drilled for wiring 1 1/4″ tubing with a dom.    they are fmb choppers own design and there a great feel and look for any bike, 34″ bar tip to tip, 10″ up rise, 6″ of pullback, 14″ bottom inside , 7 1/4″ of 1″ tubing for controls, we can make these any rise or pullback at no additional charge.

 

14 PHATTY BLAZED 1-12 CUSTOM APE HANGER FOR 2015 UP HARLEY ROAD GLIDE

14″ PHATTY BLAZED 1-1/2 CUSTOM APE HANGER FOR 2015 UP HARLEY ROAD GLIDE

14″ PHATTY BLAZED 1-1/2 CUSTOM APE HANGER FOR 2015 UP HARLEY ROAD GLIDE - 100% tig welded.   They are fmb choppers own design and there a great feel and look, 35 inches bar tip to tip, 14 inch up rise 8. 5 of pullback8-1/2 inches of 1″ tubing for controls 11-1/2 inside center, we can make these any rise at no additional charge,3 days to ship raw, 5-6 days to ship powdercoat. 120 wall thickness. 14″ phatty blazed custom handlebars for 2015 and up harley road glides, fits 2015 and up harley road glides, hand made in the usa, these come powdercoated glossy or satin black(let us know your choice), 1 1/2 tubing with a dom.

 

FMB MHBM10FMB 10 Mini Hellbent Bars Custom Ape hangers For Harley Road Glide Road King

FMB MHBM10FMB 10″ Mini Hellbent Bars Custom Ape hangers For Harley Road Glide, Road King

FMB MHBM10FMB 10″ Mini Hellbent Bars Custom Ape hangers For Harley Road Glide, Road King - 25″ of 1″ tubing for controls 6 inch pullback , 5-6 days to ship powder coat we can make these any rise or pullback at no additional charge.    They are fmb choppers own design and there a great feel and look pre drilled for wiring we will make these tbw when requested knurled 3. 5 center to center 10″ rise 28. 10″ mini hellbent bars custom apehangers for harley road glide, road king made in the usa these come powdercoated glossy or satin black 1 1/4″ tubing with a dom. 5″ inside bottom side to side 7. 120 wall thickness. These are 100% tig welded. 5″ bar tip to tip 5.

 

TCMT New Custom Ape Hanger Bar Fat 1-14 12 Rise Handlebar For Harley Sportster XL

TCMT New Custom Ape Hanger Bar Fat 1-1/4″ 12″ Rise Handlebar For Harley Sportster XL

TCMT New Custom Ape Hanger Bar Fat 1-1/4″ 12″ Rise Handlebar For Harley Sportster XL - Package included1 x handlebar (as picture shown). 12″ rise 8″ backward sweep 1 1/4″-diameter center section tapers to 1″ so that standard handlebar controls fit3-1/2 ” on-center knurling for firm mounting34-1/2″ wide from tip to tip. Aftermarket 100% brand new,good working condition and easy to installcome with drilled wiring holes. To fit all harley-davidson flst, fxst, sportster xl, including throttle-by-wire models, and any custom applicationbuyer needs to check the application according to the measurement above. Color chrome,material steel,size as shown in the photo.

 

FMB 15SS14FMB 14 Sinister Spike Bars Custom Ape Hanger For 2015 Road Glide

FMB 15SS14FMB 14″ Sinister Spike Bars Custom Ape Hanger For 2015 Road Glide

FMB 15SS14FMB 14″ Sinister Spike Bars Custom Ape Hanger For 2015 Road Glide - 100% tig welded. 14″ sinister spike bars for 2015 harley road glides designed for the new 1-1/4 riserswe added a slot for the pin in the risers so theres adjustment forward and back on the bars 1 1/4″ tubing stepped down to 8. 50″ of 1″ tubing for hand controlsnotched for throttle by wire.   Pre drilled for wiring these come powder coat glossy or satin black please let us know what finish you would like(if you do not like the spikes on top we can replace them with beveled caps)  these are fmb choppers own design and there a great feel and look 36″ bar tip to bar tip 14″ up rise 11-1/2″ bottom inside 6″ of pullback. 120 wall thickness.

 

FMB GKM12FMB 12 Gorilla Killers Custom Ape Hanger For Harley Road Glide

FMB GKM12FMB 12″ Gorilla Killers Custom Ape Hanger For Harley Road Glide

FMB GKM12FMB 12″ Gorilla Killers Custom Ape Hanger For Harley Road Glide - 120 wall thickness. 5 center to center 1 1/4″ tubing stepped down to 7.   Pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 34″ bar tip to bar tip 12″ up rise 8″ bottom inside 10-1/2″ bottom outside 6″ of pullback. 12″ gorilla killers custom ape hanger for harley road glideavailable with beveled caps on top (like pictured)or spikes please specify when ordering knurled for standard risers 3. 100% tig welded. 25″ of 1″ tubing for hand controlsnotched for throttle by wire.

 

CUSTOM APE HANGER 1 HANDLEBARS RISE 10 4 HARLEY HARLEY FXST XL FLST SPORTSTER

CUSTOM APE HANGER 1″ HANDLEBARS RISE 10″ 4 HARLEY HARLEY FXST XL FLST SPORTSTER

CUSTOM APE HANGER 1″ HANDLEBARS RISE 10″ 4 HARLEY HARLEY FXST XL FLST SPORTSTER - 10″ rise 1″ handlebars fits harley models models 96-14 with standard 1″ bars 3. 5 on center knurling ( excluding springers, fxs, and batwing models and 15″ road glide) black powder coated add period-style bobber ape-hanger handlebars to your ride bars are knurled, slotted and drilled for internal wiring stylish multi-hole drilled corner gussets offer strength and rigidity hand tig welded standard 1″ bars have 3 1/2″ on-center knurling feature chrome billet end caps 1 1/4″ king ape bars have 1 1/4″ diameter upright tubes but are stepped down to 1″ diameter to allow use of stock bar mounts and/or hand controls not for throttle-by-wire applications.

 

14 MAYHEM RG15 BARS CUSTOM APE HANGER FOR 2015 HARLEY ROAD GLIDE

14″ MAYHEM RG15 BARS CUSTOM APE HANGER FOR 2015 HARLEY ROAD GLIDE

14″ MAYHEM RG15 BARS CUSTOM APE HANGER FOR 2015 HARLEY ROAD GLIDE -   Pre drilled for wiring these come powder coat glossy or satin black please let us know what finish you would like these are fmb choppers own design and there a great feel and look 35″ bar tip to bar tip 14″ up rise 11-1/2″ bottom inside 7″ of pullback we can make these any rise or pullback at no additional charge 3 days to ship raw, 5-6 days to ship powdercoat on average. 50″ of 1″ tubing for hand controls notched for throttle by wire 120 wall thickness. 100% tig welded. 14″ mayhem bars for 2015 harley road glides, fit’s the 2015 harley road glides designed for the new 1-1/4 risers we added a slot for the pin in the risers so theres adjustment forward and back on the bars 1 1/4″ tubing stepped down to 8.

 

CUSTOM APE HANGER 1 HANDLEBARS RISE 12 4 HARLEY FXST XL FLST SPORTSTER

CUSTOM APE HANGER 1″ HANDLEBARS RISE 12″ 4 HARLEY FXST XL FLST SPORTSTER

CUSTOM APE HANGER 1″ HANDLEBARS RISE 12″ 4 HARLEY FXST XL FLST SPORTSTER - Center section and tips taper to 1″ so that standard handlebar controls fit. 1″-diameter. 5 on center knurling ( excluding springers, fxs, and batwing models and 15″ road glide) chrome 12″ rise. 34-1/2″ wide from tip to tip. 3-1/2 on-center knurling for firm mounting. Description 12″ rise 1″ handlebars fits harley models models 96-14 with standard 1″ bars 3. Add period-style bobber ape-hanger handlebars to your ride bars are knurled, slotted and drilled for internal wiring stylish multi-hole drilled corner gussets offer strength and rigidity hand tig welded standard 1″ bars have 3 1/2″ on-center knurling feature chrome billet end caps 1 1/4″ king ape bars have 1 1/4″ diameter upright tubes but are stepped down to 1″ diameter to allow use of stock bar mounts and/or hand controls not for throttle-by-wire application.

 

14 PHATTY MERCS 1-12 CUSTOM APE HANGER FOR 2015 UP HARLEY ROAD GLIDE

14″ PHATTY MERCS 1-1/2 CUSTOM APE HANGER FOR 2015 UP HARLEY ROAD GLIDE

14″ PHATTY MERCS 1-1/2 CUSTOM APE HANGER FOR 2015 UP HARLEY ROAD GLIDE - 50″ of 1″ tubing for hand controls, notched for throttle by wire. 120 wall thickness. 14″ phatty mercs 1-1/2 custom ape hanger for 2015 and up harley road glides , designed for the new 1-1/4 riserswe added a slot for the pin in the risers so theres adjustment forward and back on the bars, 1 1/2″ tubing stepped down to 8. 5 of pullback, we can make these any rise or pullback at no additional charge.   pre drilled for wiring, these come powder coat glossy or satin black , please let us know what finish you would like,  these are fmb choppers own design and there a great feel and look 36 inches bar tip to bar tip, 14 inch up rise 11 inch bottom inside 11. 100% tig welded.

 

FMB HB14FMB 14 Hellbent Narrow Bars Custom Ape Hangers Handlebars

FMB HB14FMB 14″ Hellbent Narrow Bars Custom Ape Hangers Handlebars

FMB HB14FMB 14″ Hellbent Narrow Bars Custom Ape Hangers Handlebars - 5″ of pullback 7″ of 1″ tubing inside center for risers 1 1/4″ tapered down for master cylinder relief 7 1/4″ of 1″ tubing for controls. Fmb choppers custom 14″ hellbent narrow ape hangers these are for standard trees 3. 120 wall thickness.    They are fmb choppers own design and there a great feel and look for any bike 33″ bar tip to bar tip 14″ up rise 7. These are 100% tig welded. 5 center to center are pre drilled for wiring these come powdercoated glossy or satin black 1 1/4″ tubing stepped down to 1″  tubing with a.

 

FMB RKM14FMB 14 Reaper King Bars Custom Ape Hanger Handlebars 4 Harley Road Kings

FMB RKM14FMB 14″ Reaper King Bars Custom Ape Hanger Handlebars 4 Harley Road Kings

FMB RKM14FMB 14″ Reaper King Bars Custom Ape Hanger Handlebars 4 Harley Road Kings - 14″ reaper king bars custom ape hanger handlebars for harley road kings/glides knurled for standard risers 3. 5 center to center 1 1/4″ tubing stepped down to 7.   pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 32″ bar tip to bar tip 14″ up rise 11″ bottom inside 13. 6″ of 1″ tubing inside center for risers100% tig welded. 120 wall thickness. 25″ of 1″ tubing for hand controlsnotched for throttle by wire. 5″ bottom outside 6″ of pullback.

 

FMB HB16FMB 16 Hellbent Narrow Bars Custom Ape Hangers Handlebars

FMB HB16FMB 16″ Hellbent Narrow Bars Custom Ape Hangers Handlebars

FMB HB16FMB 16″ Hellbent Narrow Bars Custom Ape Hangers Handlebars -    They are fmb choppers own design and there a great feel and look for any bike 33″ bar tip to bar tip 16″ up rise 7. These are 100% tig welded. 5″ of pullback 7″ of 1″ tubing inside center for risers 1 1/4″ tapered down for master cylinder relief 7 1/4″ of 1″ tubing for controls. 5 center to center are pre drilled for wiring these come powdercoated glossy or satin black 1 1/4″ tubing stepped down to 1″  tubing with a. Fmb choppers custom 16″ hellbent narrow ape hangers these are for standard trees 3. 120 wall thickness.

 

FMB SSKM10FMB 10 Sinister Spiked Bars Custom Ape hangers For Harley Road Glides Kings

FMB SSKM10FMB 10″ Sinister Spiked Bars Custom Ape hangers For Harley Road Glides/ Kings

FMB SSKM10FMB 10″ Sinister Spiked Bars Custom Ape hangers For Harley Road Glides/ Kings - 120 wall thickness. 25″ of 1″ tubing for controls 6 inch pullback , 5-6 days to ship powder coat we can make these any rise or pullback at no additional charge. 10″ sinister spiked bars custom apehangers for harley road glides and road kings made in the usa these come powdercoated glossy or satin black 1 1/4″ tubing with a dom. 5 center to center 10″ rise 30″ bar tip to tip 8″ inside bottom side to side 6″ of 1 inch knurled mounting area 7. These are 100% tig welded.    They are fmb choppers own design and there a great feel and look pre drilled for wiring we will make these tbw when requested knurled 3.

 

FMB 15GK16FMB 16 Gorilla Killer Bars Custom Ape Hanger For 2015 Road Glide

FMB 15GK16FMB 16″ Gorilla Killer Bars Custom Ape Hanger For 2015 Road Glide

FMB 15GK16FMB 16″ Gorilla Killer Bars Custom Ape Hanger For 2015 Road Glide -   pre drilled for wiring these come powder coat glossy or satin black please let us know what finish you would like(if you do not like the spikes on top we can replace them with beveled caps)  these are fmb choppers own design and there a great feel and look 34″ bar tip to bar tip 16″ up rise 11-1/2″ bottom inside 6″ of pullback. 120 wall thickness. 50″ of 1″ tubing for hand controlsnotched for throttle by wire. 100% tig welded. 16″ gorilla killer bars for 2015 harley road glides designed for the new 1-1/4 riserswe added a slot for the pin in the risers so theres adjustment forward and back on the bars 1 1/4″ tubing stepped down to 8.

 

FMB MHBM9FMB 9 Mini Hellbent Bars Custom Ape hangers For Harley Road Glide Road King

FMB MHBM9FMB 9″ Mini Hellbent Bars Custom Ape hangers For Harley Road Glide, Road King

FMB MHBM9FMB 9″ Mini Hellbent Bars Custom Ape hangers For Harley Road Glide, Road King - 25″ of 1″ tubing for controls 6 inch pullback , 5-6 days to ship powder coat we can make these any rise or pullback at no additional charge. 5″ bar tip to tip 5. 120 wall thickness. 5″ inside bottom side to side 7.    they are fmb choppers own design and there a great feel and look pre drilled for wiring we will make these tbw when requested knurled 3. These are 100% tig welded. 5 center to center 9″ rise 28. 9″ mini hellbent bars custom apehangers for harley road glide, road king made in the usa these come powdercoated glossy or satin black 1 1/4″ tubing with a dom.

 

12 Reaper Bars Custom Ape Hanger For 2015 AND UP Harley Road glide

12″ Reaper Bars Custom Ape Hanger For 2015 AND UP Harley Road glide

12″ Reaper Bars Custom Ape Hanger For 2015 AND UP Harley Road glide - 100% tig welded. One of our most popular bars now fit the 2015 harley road glides 12″ reaper bars for 2015 harley road glides designed for the new 1-1/4 risers we added a slot for the pin in the risers so theres adjustment forward and back on the bars, 1 1/4″ tubing stepped down to 8.  These are fmb choppers own design and there a great feel and look 36″ bar tip to bar tip12″ up rise 11-1/2″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge3 days to ship raw, 5-6 days to ship powdercoat. 50″ of 1″ tubing for hand controlsnotched for throttle by wire. 120 wall thickness.   Pre drilled for wiring these come powder coat glossy or satin black please let us know what finish you would like.