Best 30 Victory Handlebars

 

HiLo MAYHEM Custom Handlebars For Victory Cross Country Crossroads

Hi/Lo MAYHEM Custom Handlebars For Victory Cross Country & Crossroads

Hi/Lo MAYHEM Custom Handlebars For Victory Cross Country & Crossroads -    They are fmb choppers own design and there a great feel and look 33-3/4″ bar tip to tip 17″ from mounting base to top of hand control area 10-1/2″ side to side inside 113″ outside to outside 8-1/2″ of 1″ tubing for controls , 5-6 days to ship powder coat (installation notes)by re routing your cables, wires and re angling your banjo fitting these bars will bolt right on with out extending any of your cablesbut we still suggest buying victory’s extended brake cable on the inside of the switch housings there is a little alignment dowel that will need to be gridded down with a file or dremel. 120 wall thickness. These are 100% tig welded. Hi/lo mayhem custom handlebars for victory cross country & crossroads these bars can be used at a low profile height or can be raised to give your bike that custom ape hanger feel these are plus 2 back for more of a comfortable ride these are not pre drilled because of victory’s cables are on the outside but if you want to do internal wiring, we can pre drill for no extra charge made in the usa these come powdercoated glossy or satin black 1 1/4″ tubing with a dom.

 

14 MOTO X CUSTOM T BAR HANDLEBARS FOR VICTORY 8 BALL HI BALL VEGAS

14″ MOTO X CUSTOM T BAR HANDLEBARS FOR VICTORY 8 BALL HI BALL VEGAS

14″ MOTO X CUSTOM T BAR HANDLEBARS FOR VICTORY 8 BALL HI BALL VEGAS - These are 100% tig welded. 120 wall thickness. 14″ moto x custom t bar handlebars for victory (16 inch rise on bike in ad) these come powdercoated glossy or satin black, let us know your choice, for victory trees with 5″ center to center, pre drilled for wiring, 1 1/4″ tubing with a dom.   1/2×13 threaded insert welded into the base,  they are fmb choppers own design and there a great feel and look for any bike, 30 inch bar tip to tip, 14 inch up rise, 0 of pullback 8-1/2 of 1″ tubing for controls, we can make these any rise at no additional charge.

 

VICTORY CROSS COUNTRY VERTICALLY CHALLENGED PLUS 3 HANDLEBARS

VICTORY CROSS COUNTRY VERTICALLY CHALLENGED PLUS 3 HANDLEBARS

VICTORY CROSS COUNTRY VERTICALLY CHALLENGED PLUS 3 HANDLEBARS - 120 wall thickness.    They are fmb choppers own design and there a great feel and look for any bike , 34″ bar tip to tip, 22″ up rise, 8-1/2″ of 1″ tubing for controls (installation notes) by re routing your cables, wires and re angling your banjo fitting these bars will bolt right on with out extending any of your cables, follow cables down and cut tie downs to get extra length, on the inside of the switch housings there is a little alignment dowel that will need to be gridded down with a file or dremel , hand controls need to be put on bars before mounting to risers. Victory cross country vertically challenged bars, made in the usa,all depending on placement these bars are a plus 3 to plus 4, these come powdercoated glossy or satin black (let us know your choice) fits victory cross countrys, 1 1/4″ tubing with a dom. These are 100% tig welded.

 

12HELLS GATE CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

12″HELLS GATE CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

12″HELLS GATE CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 120 wall thickness. 12″ hells gate custom handlebars for victory 8 ball, highball, hammer, 1 1/4″ tubing stepped down to 1″ tubing for hand controls.  Pre drilled for wiring,these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 12″ up rise, 9″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge. 100% tig welded.

 

14 PHATT BEND 1-12 CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

14″ PHATT BEND 1-1/2 CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

14″ PHATT BEND 1-1/2 CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 7″ of pullback, we can make these any rise or pullback at no additional charge. 14″ phatt bend 1-1/2 custom handlebars for victory 8 ball, highball, hammer, 1 1/2″ tubing stepped down to 1″ tubing for hand controls.   pre drilled for wiring, these come powder coat glossy or satin black, please let us know what finish you would like,  these are fmb choppers own design and there a great feel and look, 33″ bar tip to bar tip, 14″ up rise, 9″ bottom inside. 100% tig welded. 120 wall thickness.

 

Genuine OEM VICTORY Handlebar switch L H 4011045-385

Genuine OEM VICTORY Handlebar switch L H 4011045-385

Genuine OEM VICTORY Handlebar switch L H 4011045-385 - Hand made in the usa. Genuine oem victory. Genuine oem victory. Powdercoated. Fits victory jackpot, highball, 8 ball.

 

FMB VFHBFMB Frisco H-Bomb Custom Made Handlebars For Victory 8 Ball High Ball

FMB VFHBFMB Frisco H-Bomb Custom Made Handlebars For Victory 8 Ball, High Ball

FMB VFHBFMB Frisco H-Bomb Custom Made Handlebars For Victory 8 Ball, High Ball - Frisco h-bomb bars for victory 8 ball, high ballmade with heavy duty. 120 dom 1-1/4 steel1/2x 13 threaded inserts welded into the bases for standard victory trees mounting 5″ center to center 1 1/4″ tubing stepped down to 8. 5″ of 1″ tubing for hand controls pre drilled for wiring these come powdercoated glossy or satin black  these are fmb choppers own design and there a great feel and look 29″ bar tip to bar tip from bottom of mount point to highest point on bend 6-1/4 tall 2″ of pullback we can make these any rise at no additional charge hand made in youngsville nc usa.

 

SPIKE BEND MID APE CUSTOM HANDLEBARS FOR VICTORY CROSS COUNTRY CROSSROADS

SPIKE BEND MID APE CUSTOM HANDLEBARS FOR VICTORY CROSS COUNTRY & CROSSROADS

SPIKE BEND MID APE CUSTOM HANDLEBARS FOR VICTORY CROSS COUNTRY & CROSSROADS - These are 100% tig welded. Spike bend mid ape custom handlebars for victory cross country & crossroads ,bar work with stock cables and wires, hand made in the usa, these come powdercoated glossy or satin black (let us know your choice) 1 1/4″ tubing with a dom.  These are fmb choppers own design and there a great feel and look 33-3/4″ bar tip to tip, 14″ from mounting base to top of hand control area, 10-1/2″ side to side inside , 8-1/2″ of 1″ tubing for controls. 120 wall thickness.

 

12 PHATT BEND 1-12 CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

12″ PHATT BEND 1-1/2 CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

12″ PHATT BEND 1-1/2 CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 120 wall thickness. 100% tig welded. 12″ phatt bend 1-1/2 custom handlebars for victory 8 ball, highball, hammer, 1 1/2″ tubing stepped down to 1″ tubing for hand controls.   Pre drilled for wiring, these come powder coat glossy or satin black, please let us know what finish you would like,  these are fmb choppers own design and there a great feel and look, 33″ bar tip to bar tip, 12″ up rise, 9″ bottom inside. 7″ of pullback, we can make these any rise or pullback at no additional charge.

 

12 MERCENARY CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

12″ MERCENARY CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

12″ MERCENARY CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 12 “mercenary custom handlebars for victory 8 ball, highball, hammer, 1 1/4″ tubing stepped down to 1″ tubing for hand controls. 120 wall thickness.  Pre drilled for wiring,these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 12″ up rise, 9″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge. 100% tig welded.

 

FMB VAB14FMB 14 Anarchy T Bar Custom Handlebars For Victory 8 Ball Hi Ball

FMB VAB14FMB 14″ Anarchy T Bar Custom Handlebars For Victory 8 Ball Hi Ball

FMB VAB14FMB 14″ Anarchy T Bar Custom Handlebars For Victory 8 Ball Hi Ball - 120 wall thickness. 5″ bar tip to tip 14″ up rise 0″ of pullback 7 1/4″ of 1″ tubing for controls we can make these any rise at no additional charge ,. These are 100% tig welded.   1/2×13 threaded insert welded into the base  they are fmb choppers own design and there a great feel and look for any bike 29. 14″ anarchy t bar custom handlebars for victory made in the usa these come powdercoated glossy or satin black(let us know your choice) for victory trees with 5″ center to center pre drilled for wiring 1 1/4″ tubing with a dom.

 

12 BLAZED CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

12″ BLAZED CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

12″ BLAZED CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 12″ blazed custom handlebars for victory 8 ball, highball, hammer, 1 1/4″ tubing stepped down to 1″ tubing for hand controls. 120 wall thickness.  pre drilled for wiring,these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 12″ up rise, 9″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge. 100% tig welded.

 

14 MERCENARY CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

14″ MERCENARY CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

14″ MERCENARY CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 100% tig welded. 120 wall thickness.  Pre drilled for wiring,these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 14″ up rise, 9″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge. 14 “mercenary custom handlebars for victory 8 ball, highball, hammer, 1 1/4″ tubing stepped down to 1″ tubing for hand controls.

 

16HELLS GATE CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

16″HELLS GATE CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

16″HELLS GATE CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 100% tig welded.  Pre drilled for wiring,these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 16″ up rise, 9″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge. 120 wall thickness. 16″ hells gate custom handlebars for victory 8 ball, highball, hammer, 1 1/4″ tubing stepped down to 1″ tubing for hand controls.

 

14HELLS GATE CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

14″HELLS GATE CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

14″HELLS GATE CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer -  Pre drilled for wiring,these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 14″ up rise, 9″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge. 14″ hells gate custom handlebars for victory 8 ball, highball, hammer, 1 1/4″ tubing stepped down to 1″ tubing for hand controls. 100% tig welded. 120 wall thickness.

 

16 PHATT BEND 1-12 CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

16″ PHATT BEND 1-1/2 CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

16″ PHATT BEND 1-1/2 CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 120 wall thickness. 100% tig welded. 7″ of pullback, we can make these any rise or pullback at no additional charge.   Pre drilled for wiring, these come powder coat glossy or satin black, please let us know what finish you would like,  these are fmb choppers own design and there a great feel and look, 33″ bar tip to bar tip, 16″ up rise, 9″ bottom inside. 16″ phatt bend 1-1/2 custom handlebars for victory 8 ball, highball, hammer, 1 1/2″ tubing stepped down to 1″ tubing for hand controls.

 

12 MOTO X CUSTOM T BAR HANDLEBARS FOR VICTORY 8 BALL HI BALL VEGAS

12″ MOTO X CUSTOM T BAR HANDLEBARS FOR VICTORY 8 BALL HI BALL VEGAS

12″ MOTO X CUSTOM T BAR HANDLEBARS FOR VICTORY 8 BALL HI BALL VEGAS - These are 100% tig welded. 120 wall thickness.   1/2×13 threaded insert welded into the base,  they are fmb choppers own design and there a great feel and look for any bike, 30 inch bar tip to tip, 12 inch up rise, 0 of pullback 8-1/2 of 1″ tubing for controls, we can make these any rise at no additional charge. 12″ moto x custom t bar handlebars for victory (16 inch rise on bike in ad) these come powdercoated glossy or satin black, let us know your choice, for victory trees with 5″ center to center, pre drilled for wiring, 1 1/4″ tubing with a dom.

 

16 BLAZED CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

16″ BLAZED CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

16″ BLAZED CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 120 wall thickness. 100% tig welded.  Pre drilled for wiring,these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 16″ up rise, 9″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge. 16″ blazed custom handlebars for victory 8 ball, highball, hammer, 1 1/4″ tubing stepped down to 1″ tubing for hand controls.

 

Genuine OEM VICTORY Handlebar 2 Pullback 2873379

Genuine OEM VICTORY Handlebar 2″ Pullback 2873379

Genuine OEM VICTORY Handlebar 2″ Pullback 2873379 - Genuine oem new. Genuine oem victory. Hand made in the usa. Fits victory jackpot, highball, 8 ball. Genuine oem victory.

 

VICTORY CROSS COUNTRY 1-12 SMOOTH TOP BAR APE HANGER CUSTOM HANDLEBARS

VICTORY CROSS COUNTRY 1-1/2 SMOOTH TOP BAR APE HANGER CUSTOM HANDLEBARS

VICTORY CROSS COUNTRY 1-1/2 SMOOTH TOP BAR APE HANGER CUSTOM HANDLEBARS -  these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look, 34″ bar tip to bar tip, 10-1/2″ side to side inside, 8″ of pullback, (installation notes), by re routing your cables, wires and re angling your banjo fitting these bars will bolt right on with out extending any of your cables, on the inside of the switch housings there is a little alignment dowel that will need to be gridded down with a file or dremel. 120 wall thickness. 100% tig welded. Victory cross country 1-1/2 phatt smooth top ape hangers, will work with stock cables and wires, 1 1/2″ tubing stepped down to 1″ tubing for hand controls.

 

FMB VHLS16FMB HiLo Smooth Top Custom Handlebars For Victory Cross Country Crossroads

FMB VHLS16FMB Hi/Lo Smooth Top Custom Handlebars For Victory Cross Country & Crossroads

FMB VHLS16FMB Hi/Lo Smooth Top Custom Handlebars For Victory Cross Country & Crossroads - Hi/lo smooth top custom handlebars for victory cross country & crossroads these bars can be used at a low profile height or can be raised to give your bike that custom ape hanger feel these are plus 2 back for more of a comfortable ride these are not pre drilled because of victory’s cables are on the outside but if you want to do internal wiring, we can pre drill for no extra charge made in the usa these come powdercoated glossy or satin black 1 1/4″ tubing with a dom. These are 100% tig welded.    They are fmb choppers own design and there a great feel and look 33-3/4″ bar tip to tip 17″ from mounting base to top of hand control area 10-1/2″ side to side inside 113″ outside to outside 8-1/2″ of 1″ tubing for controls , 5-6 days to ship powder coat (installation notes)by re routing your cables, wires and re angling your banjo fitting these bars will bolt right on with out extending any of your cablesbut we still suggest buying victory’s extended brake cable on the inside of the switch housings there is a little alignment dowel that will need to be gridded down with a file or dremel. 120 wall thickness.

 

Victory Motorcycle Ape Hanger Handlebar - Gloss Black - ABS Models

Victory Motorcycle Ape Hanger Handlebar – Gloss Black – ABS Models

Victory Motorcycle Ape Hanger Handlebar – Gloss Black – ABS Models - These handlebars are for use on motorcycles with abs. (Consult local regulations regarding handlebar height restrictions. ) The premium black finish complements a bike’s other black components and accessories. Cross country black ape hangers enhance the custom style of a victory® cross country, cross country tour or cross roads and provide a rider with a comfortable reach to the upper controls. These handlebars command attention, extend upward, and put the hand grips and upper controls in an elevated position. These mid-height ape hangers will not stress a rider’s arms and are legal in most states.

 

16 MERCENARY CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

16″ MERCENARY CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

16″ MERCENARY CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 120 wall thickness. 100% tig welded.  Pre drilled for wiring,these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 16″ up rise, 9″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge. 16 “mercenary custom handlebars for victory 8 ball, highball, hammer, 1 1/4″ tubing stepped down to 1″ tubing for hand controls.

 

16 MOTO X CUSTOM T BAR HANDLEBARS FOR VICTORY 8 BALL HI BALL VEGAS

16″ MOTO X CUSTOM T BAR HANDLEBARS FOR VICTORY 8 BALL HI BALL VEGAS

16″ MOTO X CUSTOM T BAR HANDLEBARS FOR VICTORY 8 BALL HI BALL VEGAS - These are 100% tig welded. 16″ moto x custom t bar handlebars for victory (16 inch rise on bike in ad) these come powdercoated glossy or satin black, let us know your choice, for victory trees with 5″ center to center, pre drilled for wiring, 1 1/4″ tubing with a dom.   1/2×13 threaded insert welded into the base,  they are fmb choppers own design and there a great feel and look for any bike, 30 inch bar tip to tip, 16 inch up rise, 0 of pullback 8-1/2 of 1″ tubing for controls, we can make these any rise at no additional charge. 120 wall thickness.

 

VICTORY CROSS COUNTRY 1-12 PHATT APE HANGERS CUSTOM HANDLEBARS

VICTORY CROSS COUNTRY 1-1/2 PHATT APE HANGERS CUSTOM HANDLEBARS

VICTORY CROSS COUNTRY 1-1/2 PHATT APE HANGERS CUSTOM HANDLEBARS - 100% tig welded. 120 wall thickness.  These come powder coat glossy or satin black, please let us know what finish you would like,  these are fmb choppers own design and there a great feel and look , 34″ bar tip to bar tip, 10-1/2″ side to side inside , 8″ of pullback (installation notes) by re routing your cables, wires and re angling your banjo fitting these bars will bolt right on with out extending any of your cables, on the inside of the switch housings there is a little alignment dowel that will need to be gridded down with a file or dremel. Victory cross country 1-1/2 phatt ape hangers, will work with stock cables and wires, 1 1/2″ tubing stepped down to 1″ tubing for hand control,.

 

Genuine OEM VICTORY Handlebar riser cap 5135924-266

Genuine OEM VICTORY Handlebar riser cap 5135924-266

Genuine OEM VICTORY Handlebar riser cap 5135924-266 - Hand made in the usa. Dom tubing. Genuine oem victory. Fits victory jackpot, highball, 8 ball. Powdercoated.

 

FMB VAB16FMB 16 Anarchy T Bar Custom Handlebars For Victory 8 Ball Hi Ball

FMB VAB16FMB 16″ Anarchy T Bar Custom Handlebars For Victory 8 Ball Hi Ball

FMB VAB16FMB 16″ Anarchy T Bar Custom Handlebars For Victory 8 Ball Hi Ball - 5″ bar tip to tip 16″ up rise 0″ of pullback 7 1/4″ of 1″ tubing for controls we can make these any rise at no additional charge ,. These are 100% tig welded.   1/2×13 threaded insert welded into the base  they are fmb choppers own design and there a great feel and look for any bike 29. 120 wall thickness. 16″ anarchy t bar custom handlebars for victory made in the usa these come powdercoated glossy or satin black(let us know your choice) for victory trees with 5″ center to center pre drilled for wiring 1 1/4″ tubing with a dom.

 

FMB VHLHB16FMB HiLo Hellbent Custom Handlebars For Victory Cross Country Crossroads

FMB VHLHB16FMB Hi/Lo Hellbent Custom Handlebars For Victory Cross Country & Crossroads

FMB VHLHB16FMB Hi/Lo Hellbent Custom Handlebars For Victory Cross Country & Crossroads - These are 100% tig welded. 120 wall thickness.    They are fmb choppers own design and there a great feel and look 33-1/2″ bar tip to tip 17″ from mounting base to top of hand control area 10-1/2″ side to side inside 113″ outside to outside 8-1/2″ of 1″ tubing for controls , 5-6 days to ship powder coat (installation notes)by re routing your cables, wires and re angling your banjo fitting these bars will bolt right on with out extending any of your cablesbut we still suggest buying victory’s extended brake cable on the inside of the switch housings there is a little alignment dowel that will need to be gridded down with a file or dremel. Hi/lo hellbent custom handlebars for victory cross country & crossroads these bars can be used at a low profile height or can be raised to give your bike that custom ape hanger feel these are plus 2 back for more of a comfortable ride these are not pre drilled because of victory’s cables are on the outside but if you want to do internal wiring, we can pre drill for no extra charge made in the usa these come powdercoated glossy or satin black 1 1/4″ tubing with a dom.

 

Victory Ape Hanger Handlebars - Chrome - Non ABS Models

Victory Ape Hanger Handlebars – Chrome – Non ABS Models

Victory Ape Hanger Handlebars – Chrome – Non ABS Models - ) The premium polished stainless steel finish complements a bike’s other chrome components and accessories. These handlebars are for use on motorcycles not equipped with abs. Cross country ape hangers enhance the custom style of a victory® cross country, cross country tour or cross roads and provide a rider with a comfortable reach to the upper controls. These mid-height ape hangers will not stress a rider’s arms and are legal in most states. These handlebars command attention, extend upward, and put the hand grips and upper controls in an elevated position. (consult local regulations regarding handlebar height restrictions.

 

14 BLAZED CUSTOM HANDLEBARS FOR VICTORY 8 Ball Highball hammer

14″ BLAZED CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer

14″ BLAZED CUSTOM HANDLEBARS FOR VICTORY 8 Ball, Highball, hammer - 14″ blazed custom handlebars for victory 8 ball, highball, hammer, 1 1/4″ tubing stepped down to 1″ tubing for hand controls.  pre drilled for wiring,these come powder coat glossy or satin black , please let us know what finish you would like, these are fmb choppers own design and there a great feel and look 33″ bar tip to bar tip 14″ up rise, 9″ bottom inside 7″ of pullback, we can make these any rise or pullback at no additional charge. 100% tig welded. 120 wall thickness.