Top 60 Best Arais

 

ARAI DT-X Solid Helmet White Lg 820463

ARAI DT-X Solid Helmet White Lg 820463

ARAI DT-X Solid Helmet White Lg 820463 - The dt-x features the pb-clc (peripheral belt, complex laminate construction) shell born from arais exclusive f-1 helmet technology, made from the layering of various proprietary materials, bonded with specially-developed adhesives the upper edge of the eye port is reinforced with the peripheral belt, which is custom woven in house using proprietary super fibers, to increase strength and help redirect impact energy laterally this makes for a more compact shell in shell creation, resin serves. The upper front vent is arais newest design, incorporating both an intake and exhaust port, creating a dual flow effect and is therefore aptly named the dual flow duct air enters the front intake of the duct and draws out hot exhaust air from the rear toward the back, the newly styled rear duct flow spoiler also incorporates a dual flow system for great airflow the center duct hole takes in air and uses the low pressure from the left and right duct slots to draw out hot air this new ventilat. The shield-mounting mechanism features a new variable axis system (vas) pivot operation feature the vas pivot cover is now smaller and lower than the previous design, yielding an average 24mm more area above the cover as a result the shell is now smoother along the snell test line in the temple area, thus increasing the helmets ability to glance off objects during an impact. Keeping with the round & smooth egg-shaped form, the hyper ridge, along the lower edge of the shell increases shell strength & protection around the bottom opening, managing energy migration laterally and the new side exhaust vents, sculpted into the hyper ridge design, result in a more efficient and smoother airflow the dt-x utilizes arais proprietary multi-density one-piece eps liner, specifically tuned to each area of the helmet, to maximize performance shell shape & strength, combined wi. The dt-x interior is made with an odor-reducing and dirt-resisting antimicrobial material the new neck roll, which wraps comfortably around the riders neck, reduces wind noise while also improving ease of ingress and egress the addition of the fcs cheek pad makes putting on and removing the helmet easier while maintaining comfort around the lower jaw both the comfort headliner and cheek pads have 5mm peel-away layers for microfitting the ear pockets have molded recesses for easier intercom s.

 

Arai SAI Max Vision Pinlock Shield Insert Light Smoke

Arai SAI Max Vision Pinlock Shield Insert Light Smoke

Arai SAI Max Vision Pinlock Shield Insert Light Smoke - Fully integrated interchangeable pinlock insert lens especially developed for the max vision visor 100% uv protection easy to clean and to apply minimal �false light� effects insert lens made of porous, moist absorbing material double visor system with an airtight chamber offering enhance fog resistant properties brow vents enhanced, wider field of view interchangeable for different colors the max vision anti-fog shields can only be used with max vision anti-fog shield inserts.

 

Arai XD4 Flare Dual Sport Helmet-Orange-XL

Arai XD4 Flare Dual Sport Helmet-Orange-XL

Arai XD4 Flare Dual Sport Helmet-Orange-XL - Dry-cool technology keeps you dry and cool for greater comfort. Comfort headliner, with micro fitting 5mm peel away temple pads. Snell m2015 and dot approved. Fcs (facial contour support) cheek pad design, also with a 5mm peel away micro fit feature. Fully removable/replaceable/washable interior.

 

Arai Helmets Shield Base Plate Set 3017

Arai Helmets Shield Base Plate Set 3017

Arai Helmets Shield Base Plate Set 3017 - The vas pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover the shell is now smoother along the snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact. Replacement helmet shield base plate set. The vas latch captures and securely holds the shield closed to help prevent unexpected opening in addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation. The sai shield on the corsair-v has only a single axis pivot point but the corsair-x has the new vas mechanism with a variable axis incorporating a moving pivot point by combining the pin trajectory, which is based on an imaginary axis, with the two trajectories of the double pivot point slot, the shield opens and closes smoothly even with the much lower shield mount position. New type 12 diffusers are 20mm longer and take in 19% more air than the previous design in addition, the new air intake vents have three positions and are designed to help provide improved sealing which decreases road noise and water intrusion.

 

Arai XD4 Helmet White Medium

Arai XD4 Helmet (White, Medium)

Arai XD4 Helmet (White, Medium) - Intermediate-round oval shape the new xd4 has arai’s intermediate oval (io) interior shape. Brand new xd4 arai did the only thing possible to this groundbreaking, critically acclaimed street and dirt crossover helmet. New chin vent the new vent has more intake ports for improved airflow. Developed to allow easier access to an injured rider, the xd4’s cheek pads slide out easily via the integrated pull-tabs built into the underside of the cheek pad, making helmet removal much easier for trained medical personnel. Fully removable/replaceable/washable interior includes arai’s patented dry-cool technology to keep you drier and cooler (hence the name) for greater long-haul comfort. New brow vent face shield arai has added our trademark brow vents to the new xd4 face shield, providing airflow to the temple area of the head. Its oval form is actually based on the egg’s, long known for its extremely strong and efficient shape. New exhaust ports and shell shape these new top-diffuser-vent ports nearly double the xd4’s airflow, while its new shell shape provides better aerodynamic stability at higher street speeds in concert with its high-flow peak and new side cowl vents. We made it even better. Fcs cheek pad system arai’s amazing new patent-pending fcs (facial contour support) cheek pad design delivers comfort, support and fit like nothing you’ve ever felt, and it features our exclusive 5 mm peel-away custom fit layer. Emergency cheek pad release system from arai’s decades long commitment to building helmets that do more for riders comes this major innovation, the very first emergency release cheek pad design created specifically for motorcycle helmets. New larger side cowl vents the new larger, sculpted vents improve ventilation efficiency as well as helmet stability on your head at speed. And like its predecessor, the vent’s chin bar is rounded with less protrusion making it less likely to catch and dig in during a spill, than most other designs.

 

Arai GP-J3 8859 Series 4-wheel for the open-face helmet black XL 61 GP-J3 8859XL 61 Black

Arai GP-J3 8859 Series 4-wheel for the open-face helmet black XL (61) GP-J3 8859XL (61) Black

Arai GP-J3 8859 Series 4-wheel for the open-face helmet black XL (61) GP-J3 8859XL (61) Black - Comfort by adopting the clc cap body has succeeded in that to further strengthen the safety intact. Arai helmet gp-j3 8859 rally and gymkhana is an open jet helmet that has been developed for dirt trial competitions. And high fit encompassing the entire head, the latest safety standards snell sa / fia8859 highly certified safety features.

 

ARAI HELMETS 4844 SHLD CVR SAJ SMOKE

ARAI HELMETS 4844 SHLD CVR SAJ SMOKE

ARAI HELMETS 4844 SHLD CVR SAJ SMOKE - Arai shield cover set tint alternate option for when your color matched design is out of stock or discontinued base plate set not included and must be purchased separately sold as a set.

 

Arai VAS-V Max Vision Faceshields Dark Smoke

Arai VAS-V Max Vision Faceshields Dark Smoke

Arai VAS-V Max Vision Faceshields Dark Smoke - Arai 1376. 1-year warranty. Replacement max vision faceshields for arai corsair x, quantum x and signet x helmets.

 

Arai GP6 Series SK6 Mirror Shield - Silver

Arai GP6 Series SK6 Mirror Shield – Silver

Arai GP6 Series SK6 Mirror Shield – Silver - These face shields are designed to fit the snell sa2010 and snell sa2015 arai gp6 auto racing helmet. Each shield includes a set of adjustable tear-off posts. Sold individually.

 

Arai Pinlock Insert Max Brow Clear Faceshield for Corsair VVector-2RX-Q Helmets

Arai Pinlock Insert Max Brow Clear Faceshield for Corsair V/Vector-2/RX-Q Helmets

Arai Pinlock Insert Max Brow Clear Faceshield for Corsair V/Vector-2/RX-Q Helmets - Arai dks095c pinlock faceshield insert max clear (ea) for corsair v, rx-q, vector 2 and signet-q .

 

Arai Corsair X Nicky 6 Full Face Helmet - Large

Arai Corsair X Nicky 6 Full Face Helmet – Large

Arai Corsair X Nicky 6 Full Face Helmet – Large - Dual function lever releases both the side pod and the face shield for quick and simple face shield removal. Vas shield latch system captures and holds the face shield closed and provides a de-mist position to slightly crack the shield open. Snell 2015 and dot approved. Vas (variable axis system) shield and side pods are exclusive to the arai corsair x helmet. Vas max vision face shield provides excellent visibility in all seasons thanks to the included pinlock insert.

 

Arai Corsair-X Planet Red Motorcycle Helmet Medium More Size Options

Arai Corsair-X Planet Red Motorcycle Helmet Medium (More Size Options)

Arai Corsair-X Planet Red Motorcycle Helmet Medium (More Size Options) - The vas latch captures and securely holds the shield closed to help prevent unexpected opening in addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation. The sai shield on the corsair-v has only a single axis pivot point but the corsair-x has the new vas mechanism with a variable axis incorporating a moving pivot point by combining the pin trajectory, which is based on an imaginary axis, with the two trajectories of the double pivot point slot, the shield opens and closes smoothly even with the much lower shield mount position. New type 12 diffusers are 20mm longer and take in 19% more air than the previous design in addition, the new air intake vents have three positions and are designed to help provide improved sealing which decreases road noise and water intrusion. Created from super fiber and special synthetic fibers, and assembled by arai experts, the shell provides both superb tensile strength and flexibility characteristics like the metal bands used to hold a wooden barrel together, a variety of carefully placed materials, combined with newly developed resins result in strong shells with less weight. The vas pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover the shell is now smoother along the snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact.

 

Arai Helmets TDF Duct-3 Vent Set for RX-Q Helmets - Pearl Black 4972

Arai Helmets TDF Duct-3 Vent Set for RX-Q Helmets – Pearl Black 4972

Arai Helmets TDF Duct-3 Vent Set for RX-Q Helmets – Pearl Black 4972 - One-piece injection moulding. Made of 100% polycarbonate (shatterproof), view the video below to witness the benefits of this aerospace material. Replacement helmet vent set. Superior vision clarity. High-quality finish impact resistant uv ray protection.

 

ARAI 1376 Gold Mirror Shield Visor ea for Corsair V RX-Q Vector 2 and Signet-Q Helmet 1376

ARAI 1376 Gold Mirror Shield Visor (ea) for Corsair V RX-Q Vector 2 and Signet-Q Helmet (1376)

ARAI 1376 Gold Mirror Shield Visor (ea) for Corsair V RX-Q Vector 2 and Signet-Q Helmet (1376) - Arai shield mirrorized gold sai mirrorized silver shield. Daylight use only sold individually. Colors may vary between production runs.

 

Arai ProfileRX7 CorsairVector Motorcycle Helmet Replacement Faceshield Coated Gold Mirror

Arai Profile/RX7 Corsair/Vector Motorcycle Helmet Replacement Faceshield Coated Gold Mirror

Arai Profile/RX7 Corsair/Vector Motorcycle Helmet Replacement Faceshield Coated Gold Mirror - Mirrored faceshields have a light tint. Saq/sal shield for use with rx7 profile vector (will not fit vector 2) quantum 2/ f/e/s rx7-rr3 rx7-rr4 smoked and tinted shields are designed for daytime riding, and are not recommended for nighttime use.

 

Arai Corsair-X Haslam Motorcycle Helmet LG

Arai Corsair-X Haslam Motorcycle Helmet LG

Arai Corsair-X Haslam Motorcycle Helmet LG - The vas pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover the shell is now smoother along the snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact. The sai shield on the corsair-v has only a single axis pivot point but the corsair-x has the new vas mechanism with a variable axis incorporating a moving pivot point by combining the pin trajectory, which is based on an imaginary axis, with the two trajectories of the double pivot point slot, the shield opens and closes smoothly even with the much lower shield mount position. New type 12 diffusers are 20mm longer and take in 19% more air than the previous design in addition, the new air intake vents have three positions and are designed to help provide improved sealing which decreases road noise and water intrusion. The vas latch captures and securely holds the shield closed to help prevent unexpected opening in addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation. Created from super fiber and special synthetic fibers, and assembled by arai experts, the shell provides both superb tensile strength and flexibility characteristics like the metal bands used to hold a wooden barrel together, a variety of carefully placed materials, combined with newly developed resins result in strong shells with less weight.

 

Arai XD4 SHLD BV DRK Smoke

Arai XD4 SHLD BV DRK Smoke

Arai XD4 SHLD BV DRK Smoke - And trustthe simple truth is, while there are a lot of helmets out there, there is still only one arai. Arai alone has the experience, the quality, and the trust that truly set them apartthe arai xd4 face shield replaces the category-leading arai xd4’s oe. Their name and reputation have been forged over time, the hard way. The arai difference it’s the one you can see, feel, touch. Which means they haven’t devoted three generations of the arai family to the singular goal of no-holds-barred excellence just to turn out helmets like everybody else’s.

 

Arai Helmets PRO SHADE SYSTEM

Arai Helmets PRO SHADE SYSTEM

Arai Helmets PRO SHADE SYSTEM - Fits all current arai helmets and any with the sai shield. Includes the flip up-flip down visor installed on a new, clear sai shield. Reduces sudden glare in the up position with just a subtle dip of your head so you dont have to take your hands off of the bars. Reduces excess ambient light in the up and down positions.

 

Arai Helmets Diffuser Set for XD4 Helmet - Black Frost 4135

Arai Helmets Diffuser Set for XD4 Helmet – Black Frost 4135

Arai Helmets Diffuser Set for XD4 Helmet – Black Frost 4135 - It is nowadays quite common to use a retractable sun-visor that is situated between the helmet’s outer- and inner shell to protect against sun glare however, it’s arai’s opinion that this construction could affect the performance of a helmet during impact. Replacement diffuser set for xd4 helmet. With the new pro shade system, arai now introduces a (patented) revolutionary solution to a well-known problem sun glare. Model fit see description. Part number 810479.

 

Arai Cheek Pads for Defiant helmets - 15mm

Arai Cheek Pads for Defiant helmets – 15mm

Arai Cheek Pads for Defiant helmets – 15mm - Available in the following sizes 15mm, 20mm, 25mm, 30mm, 35mm. Replacement cheek pads for use with defiant helmets.

 

Aftermarket Product Mirror Visor Shield for ARAI RR4 Vector Quantum 2EFS

[Aftermarket Product] Mirror Visor Shield for ARAI RR4 Vector Quantum 2/E/F/S

[Aftermarket Product] Mirror Visor Shield for ARAI RR4 Vector Quantum 2/E/F/S - Made of 100% polycarbonate (shatterproof), view the video below to witness the benefits of this aerospace material. Race approved. Superior vision clarity. High-quality finish impact resistant uv ray protection. One-piece injection moulding.

 

Arai SAI Shield UNISEX

Arai SAI Shield (UNISEX)

Arai SAI Shield (UNISEX) - And trustthe simple truth is, while there are a lot of helmets out there, there is still only one arai. The arai difference it’s the one you can see, feel, touch. Their name and reputation have been forged over time, the hard way. Which means they haven’t devoted three generations of the arai family to the singular goal of no-holds-barred excellence just to turn out helmets like everybody else’s. Arai alone has the experience, the quality, and the trust that truly set them apartreplacement sai face shield for corsair 5, vector 2, rx-q, and signet-q helmetsarai “sai” shield with super adsis shield system”sai” shield is 5 mm longer on each side a.

 

Arai Helmets Base Plate Set - SAI - White 2258

Arai Helmets Base Plate Set – SAI – White 2258

Arai Helmets Base Plate Set – SAI – White 2258 - Their name and reputation have been forged over time, the hard way. Arai alone has the experience, the quality, and the trust that truly set them apart replacement pinlock(r)-ready vas-v max vision face shield with tear-off posts for the arai corsair-x, quantum-x and signet-x helmets.

 

Arai 2397 Screw Kit for Helmet

Arai 2397 Screw Kit for Helmet

Arai 2397 Screw Kit for Helmet - Arai gp-5 screw kit or pivot kit for all 5 series arai helmets, gp5, gp5 k, gp5 w and sk5 includes all hardware necessary to hold your shield or visor, we recommend you keeping one of the arai pivot kits as a spare in your helmet bag.

 

Arai Corsair-X Curve Blue Motorcycle Helmet MD

Arai Corsair-X Curve Blue Motorcycle Helmet MD

Arai Corsair-X Curve Blue Motorcycle Helmet MD - New type 12 diffusers are 20mm longer and take in 19% more air than the previous design in addition, the new air intake vents have three positions and are designed to help provide improved sealing which decreases road noise and water intrusion. The sai shield on the corsair-v has only a single axis pivot point but the corsair-x has the new vas mechanism with a variable axis incorporating a moving pivot point by combining the pin trajectory, which is based on an imaginary axis, with the two trajectories of the double pivot point slot, the shield opens and closes smoothly even with the much lower shield mount position. The vas latch captures and securely holds the shield closed to help prevent unexpected opening in addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation. The vas pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover the shell is now smoother along the snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact. Created from super fiber and special synthetic fibers, and assembled by arai experts, the shell provides both superb tensile strength and flexibility characteristics like the metal bands used to hold a wooden barrel together, a variety of carefully placed materials, combined with newly developed resins result in strong shells with less weight.

 

Arai 2064 Performance Enhancing Device Kit for Helmet

Arai 2064 Performance Enhancing Device Kit for Helmet

Arai 2064 Performance Enhancing Device Kit for Helmet - Arai dks095c. 30-day warranty. Performance enhancing device (ped) kit, clear fits gp-5k, gp-5ped, gp-5w, sk-6, gp-6s, gp-6ped and gp-6rc.

 

Arai SAI Pro Shade System Extra Long Shield Only Mens Street Motorcycle Helmet Accessories - Smoke  One Size

Arai SAI Pro Shade System Extra Long Shield Only Men’s Street Motorcycle Helmet Accessories – Smoke / One Size

Arai SAI Pro Shade System Extra Long Shield Only Men’s Street Motorcycle Helmet Accessories – Smoke / One Size - The pro shade shield system includes the flip-up/flip-down visor installed on a new clear sai shield. The arai pro shade shield system fits any arai helmet with the sai shield, including defiant and vector-2.

 

Arai VAS-V MAX Vision Face Shield UNISEX

Arai VAS-V MAX Vision Face Shield (UNISEX)

Arai VAS-V MAX Vision Face Shield (UNISEX) - Which means they haven’t devoted three generations of the arai family to the singular goal of no-holds-barred excellence just to turn out helmets like everybody else’s. Arai alone has the experience, the quality, and the trust that truly set them apart replacement pinlock(r)-ready vas-v max vision face shield with tear-off posts for the arai corsair-x, quantum-x and signet-x helmets.

 

Arai Corsair X Statement Black Full Face Helmet - Large

Arai Corsair X Statement Black Full Face Helmet – Large

Arai Corsair X Statement Black Full Face Helmet – Large - Vas shield latch system captures and holds the face shield closed and provides a de-mist position to slightly crack the shield open. Snell 2015 and dot approved. Vas max vision face shield provides excellent visibility in all seasons thanks to the included pinlock insert. Vas (variable axis system) shield and side pods are exclusive to the arai corsair x helmet. Dual function lever releases both the side pod and the face shield for quick and simple face shield removal.

 

Arai Corsair X Isle of Man 2017 Limited Edition Helmet Medium

Arai Corsair X Isle of Man 2017 Limited Edition Helmet Medium

Arai Corsair X Isle of Man 2017 Limited Edition Helmet Medium - The vas (variable axis system) has a variable axis (moving pivot point). Normally the shield mounting position must remain relatively high, because a lower shield pivot will not allow the shield to open or close. In true arai fashion, the corsair-x helmet has taken helmet technology and rider protection one step further by engineering a helmet that not only guards against direct impacts, but is specifically designed to minimize the effect of glancing off impacts as well. Vas shield latch system captures and holds the shield closed more securely to help prevent unexpected opening. A specially-developed resin creates stronger bonds between shell materials with less weight. This allows shield opening and closing even with the 24mm lower shield mount position, compared to the corsair v. The corsair x type 12 air diffusers are longer than the corsair v and. The corsair x helmet shell is constructed from super fiber and other special synthetic fibers developed for f-1 helmet visor panels, assembled and bonded by arai experts. The arai corsair x motorcycle helmet features a chin curtain that helps to block air intrusion from the turbulent air underneath the helmet, as well as increases negative pressure to enhance the exhaust ventilation performance. The interior lining includes arais signature 5mm peel away ear pocket padding and ear pocket recess to accommodate communicator speakers. In addition to a de-mist position, the larger latch design allows for an intuitive and seamless operation of the shield. To increase this potential to glance off impact energy, the vas (variable axis system) side pod, pivot cover is smaller in size and its position on the shell is lower. Arai has created a stronger shell and smoother shape that is more likely to redirect impact energy than absorb it (therefore decreasing the amount of force transferred to the body).

 

Arai Clear Brow Vent Shield for XD4 Helmets

Arai Clear Brow Vent Shield for XD4 Helmets

Arai Clear Brow Vent Shield for XD4 Helmets - Sold in pairs. Replacement brow vent shield for xd4 helmets.

 

Arai GP-5 Mirrorized RedOrange

Arai GP-5 Mirrorized Red/Orange

Arai GP-5 Mirrorized Red/Orange - Fits gp5, gp5k & sk5 helmets. Will not fit gp-5w helmets. Available colors red/orange, blue, green, silver.

 

Arai Brow Vent Clear Shield for XD XD4 Helmets - One Size

Arai Brow Vent Clear Shield for XD, XD4 Helmets – One Size

Arai Brow Vent Clear Shield for XD, XD4 Helmets – One Size - The quantum-x comes with the vas-mv (max vision) shield that accepts the new vas-mv pinlock lens the new pinlock-120 lens comes with the helmet in the box and ready to install. The anti-microbial liner material on the quantum-x resists the build up of bacteria and as a result allows your helmet to stay fresher, longer, between cleanings. In keeping with the “improve on what works” mentality at arai, the new qvf & qvr upper ventilation ducts look familiar but offer more adjustment and better flow through performance. Fits arai xd and xd4 helmets. The variable access system shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about quick, easy and intuitive.

 

Arai Helmets Faceshield - Dark Smoke 1502 010988

Arai Helmets Faceshield – Dark Smoke 1502 010988

Arai Helmets Faceshield – Dark Smoke 1502 010988 - Tinted shields are designed for daytime use only and are not recommended for nighttime use. Replacement helmet faceshield for astral, astral-x, profile, quantum-2, quantum/e, quantum/f, quantum/s, rx7 corsair, rx7-rr3 and vector helmet.

 

Arai Defiant Pro Cruise Bold Red Full Face Helmet - Medium

Arai Defiant Pro Cruise Bold Red Full Face Helmet – Medium

Arai Defiant Pro Cruise Bold Red Full Face Helmet – Medium - Internals are redesigned with a focus on safety and comfort. Eco-pure liner is anti-microbial. Pro shade system for dual sun-blocking capabilities. Dot and snell m2015 certified. Ear pockets have been redesigned to better accept communication speakers for a more comfortable fit.

 

Arai VX-Pro4 Helmet-Frost Black-M

Arai VX-Pro4 Helmet-Frost Black-M

Arai VX-Pro4 Helmet-Frost Black-M - Larger relief ports to allow more air to escape from under the larger peak to minimize lift/pulling at speed. Features new peak 14mm longer, 5mm wider than vx-pro 3. New chin vent incorporates expanded ss mesh moved from inside to outside of shell, provides room to move the eps chin liner forward for more room in the face area. Chin vent has mesh cap, round and smooth to resist snagging and digging in, easily removable with single screw and will break away if necessary in an impact. Meets or exceeds snell and dot standards.

 

Arai Helmets TDF Duct-3 Vent Set for RX-Q Helmets - Smoke 4970

Arai Helmets TDF Duct-3 Vent Set for RX-Q Helmets – Smoke 4970

Arai Helmets TDF Duct-3 Vent Set for RX-Q Helmets – Smoke 4970 - The variable access system shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about quick, easy and intuitive. The anti-microbial liner material on the signet-x resists the build up of bacteria and as a result allows your helmet to stay fresher, longer, between cleanings. In keeping with the “improve on what works” mentality at arai, the new qvf & qvr upper ventilation ducts look familiar but offer more adjustment and better flow through performance. The signet-x comes with the vas-mv (max vision) shield that accepts the new vas-mv pinlock lens the new pinlock-120 lens comes with the helmet in the box and ready to install. Replacement helmet vent set.

 

Arai VX-Pro 4 Barcia BlackOrange Motocross Helmet - Large

Arai VX-Pro 4 Barcia Black/Orange Motocross Helmet – Large

Arai VX-Pro 4 Barcia Black/Orange Motocross Helmet – Large - Larger relief ports to allow more air to escape from under the larger peak to minimize lift/pulling at speed. Chin vent has mesh cap, round and smooth to resist snagging and digging in, easily removable with single screw and will break away if necessary in an impact. New chin vent incorporates expanded ss mesh moved from inside to outside of shell, provides room to move the eps chin liner forward for more room in the face area. Meets or exceeds snell and dot standards. Features new peak 14mm longer, 5mm wider than vx-pro 3.

 

Arai XD4 Vision Frost Red Dual Sport Helmet - Medium

Arai XD4 Vision Frost Red Dual Sport Helmet – Medium

Arai XD4 Vision Frost Red Dual Sport Helmet – Medium - Comfort headliner, with micro fitting 5mm peel away temple pads. Fully removable/replaceable/washable interior. Fcs (facial contour support) cheek pad design, also with a 5mm peel away micro fit feature. Dry-cool technology keeps you dry and cool for greater comfort. Snell m2015 and dot approved.

 

Arai XD4 Helmet Black Frost Large

Arai XD4 Helmet (Black Frost, Large)

Arai XD4 Helmet (Black Frost, Large) - We made it even better. New exhaust ports and shell shape these new top-diffuser-vent ports nearly double the xd4’s airflow, while its new shell shape provides better aerodynamic stability at higher street speeds in concert with its high-flow peak and new side cowl vents. Brand new xd4 arai did the only thing possible to this groundbreaking, critically acclaimed street and dirt crossover helmet. New larger side cowl vents the new larger, sculpted vents improve ventilation efficiency as well as helmet stability on your head at speed. Fcs cheek pad system arai’s amazing new patent-pending fcs (facial contour support) cheek pad design delivers comfort, support and fit like nothing you’ve ever felt, and it features our exclusive 5 mm peel-away custom fit layer. New chin vent the new vent has more intake ports for improved airflow. Fully removable/replaceable/washable interior includes arai’s patented dry-cool technology to keep you drier and cooler (hence the name) for greater long-haul comfort. Developed to allow easier access to an injured rider, the xd4’s cheek pads slide out easily via the integrated pull-tabs built into the underside of the cheek pad, making helmet removal much easier for trained medical personnel. New brow vent face shield arai has added our trademark brow vents to the new xd4 face shield, providing airflow to the temple area of the head. Intermediate-round oval shape the new xd4 has arai’s intermediate oval (io) interior shape. And like its predecessor, the vent’s chin bar is rounded with less protrusion making it less likely to catch and dig in during a spill, than most other designs. Its oval form is actually based on the egg’s, long known for its extremely strong and efficient shape. Emergency cheek pad release system from arai’s decades long commitment to building helmets that do more for riders comes this major innovation, the very first emergency release cheek pad design created specifically for motorcycle helmets.

 

Arai Helmets Shield Cover Set White 3500

Arai Helmets Shield Cover Set White 3500

Arai Helmets Shield Cover Set White 3500 - Fall there is work to protect firmly the shield from the shock caused by accident, such as. It was developed in order to perform the mounting of the shield in the race more quickly and reliably. Evolved to feed back the technology developed in the race “j holder”. By flash surface of, and suppress the occurrence of turbulence, it is excellent in quietness than ever. If you fall even during the race, for the racer that mission is to keep running as long as the bike is not broken, making it no longer essential items.

 

ARAI QUANTUM-X BLACK FROST XL

ARAI QUANTUM-X BLACK FROST XL

ARAI QUANTUM-X BLACK FROST XL - In keeping with the “improve on what works” mentality at arai, the new qvf & qvr upper ventilation ducts look familiar but offer more adjustment and better flow through performance. The new peripherally belted, super complex laminate construction shell design combines multiple materials and techniques created internally by arai that deliver both performance and affordability. The quantum-x comes with the vas-mv (max vision) shield that accepts the new vas-mv pinlock lens the new pinlock-120 lens comes with the helmet in the box and ready to install. The anti-microbial liner material on the quantum-x resists the build up of bacteria and as a result allows your helmet to stay fresher, longer, between cleanings. The variable access system shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about quick, easy and intuitive.

 

Sena 10U-AR-01 10U Motorcycle Bluetooth Communication System with Handlebar Remote for Arai Full-Face Helmet

Sena 10U-AR-01 10U Motorcycle Bluetooth Communication System with Handlebar Remote for Arai Full-Face Helmet

Sena 10U-AR-01 10U Motorcycle Bluetooth Communication System with Handlebar Remote for Arai Full-Face Helmet - Music sharing built-in fm radio tuner with a station scan and save function. Safe and easy operations by bluetooth low energy handlebar remote. Voice prompts smartphone app for iphone and android. Bluetooth intercom up to 16 kilometers (10 mile) four-way intercom universal intercom. Invisible beauty with custom design.

 

Arai Defiant Pro-Cruise Black Frost Full Face Helmet XL

Arai Defiant Pro-Cruise Black Frost Full Face Helmet, XL

Arai Defiant Pro-Cruise Black Frost Full Face Helmet, XL - Sai shield and base plates exclusive to corsair v. Hyper-ridge around the bottom enhances shell strength while providing a larger bottom opening. Arai sai shield with super adsis shield system. Larger upper vent tabs make operating the vents easier even with thick winter gloves. Cheek pads have the exclusive emergency release tab feature. Neck roll is removable and has additional exhaust channels to remove interior heat. Larger bottom opening promotes ease of putting on and taking off the helmet. Sai shield is 5mm longer on each side and provides wider field of view. Brow vents now duct air into the temple area and out the side vents for maximum cooling. Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and minimal shell size. Exclusive airwing provides unprecedented aerodynamic performance with 5 distinct positions. Enhanced air inlets of the df10 diffuser increase airflow efficiency. Latest generation of dry cool liner has a silver-grey color. Side exhaust cowls exhaust heat as well as add lateral stability at speed. Rear mounting snaps are slightly re-positioned for exclusivity to the corsair v.

 

Arai Brow Vent Clear Shield for Pin Lock XD XD4 Helmets - One Size

Arai Brow Vent Clear Shield for Pin Lock XD, XD4 Helmets – One Size

Arai Brow Vent Clear Shield for Pin Lock XD, XD4 Helmets – One Size - Fits arai xd and xd4 helmets. 30-day warranty. Arai dks095c.

 

ARAI Signet-X Black Frost Motorcycle Helmet LG

ARAI Signet-X Black Frost Motorcycle Helmet LG

ARAI Signet-X Black Frost Motorcycle Helmet LG - The signet-x comes with the vas-mv (max vision) shield that accepts the new vas-mv pinlock lens the new pinlock-120 lens comes with the helmet in the box and ready to install. The signet-x has arai’s long oval (lo) interior fit shape longer front-to-back and a more narrow side-to-side (as compared to intermediate oval). The anti-microbial liner material on the signet-x resists the build up of bacteria and as a result allows your helmet to stay fresher, longer, between cleanings. The variable access system shield mechanism was developed to enhance the shape of the shell, but the easy to learn changing mechanism is what most people are raving about quick, easy and intuitive. In keeping with the “improve on what works” mentality at arai, the new qvf & qvr upper ventilation ducts look familiar but offer more adjustment and better flow through performance.

 

Arai Corsair-X Planet Blue Motorcycle Helmet Large More Size Options

Arai Corsair-X Planet Blue Motorcycle Helmet Large (More Size Options)

Arai Corsair-X Planet Blue Motorcycle Helmet Large (More Size Options) - The sai shield on the corsair-v has only a single axis pivot point but the corsair-x has the new vas mechanism with a variable axis incorporating a moving pivot point by combining the pin trajectory, which is based on an imaginary axis, with the two trajectories of the double pivot point slot, the shield opens and closes smoothly even with the much lower shield mount position. The vas latch captures and securely holds the shield closed to help prevent unexpected opening in addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation. The vas pivot cover is now smaller and lower than the previous design, yielding an average of 24mm more area above the cover the shell is now smoother along the snell test line in the temple area, thus increasing the helmet’s ability to glance off objects during an impact. New type 12 diffusers are 20mm longer and take in 19% more air than the previous design in addition, the new air intake vents have three positions and are designed to help provide improved sealing which decreases road noise and water intrusion. Created from super fiber and special synthetic fibers, and assembled by arai experts, the shell provides both superb tensile strength and flexibility characteristics like the metal bands used to hold a wooden barrel together, a variety of carefully placed materials, combined with newly developed resins result in strong shells with less weight.

 

Arai Helmets Cor X Vas-v Maxvsn Shld D Tint

Arai Helmets Cor X Vas-v Maxvsn Shld D Tint

Arai Helmets Cor X Vas-v Maxvsn Shld D Tint - Arai dks095c. 30-day warranty. Replacement max vision faceshields for arai corsair-x, quantum-x and signet-x helmets.

 

ARAI SAI Max Vision Visor with pin lock 1132 pinlockshield shield not included

ARAI SAI Max Vision Visor with pin lock 1132 (pinlock/shield shield not included)

ARAI SAI Max Vision Visor with pin lock 1132 (pinlock/shield shield not included) - Arai sai max vision visor with pin lock 1132&#9fits corsair v, rx-q, and vector 2&#9visor only, pinlock shield/film not included&#9.

 

Arai Brow Vent Light Smoke Shield for Arai XD4 Helmets - One Size

Arai Brow Vent Light Smoke Shield for Arai XD4 Helmets – One Size

Arai Brow Vent Light Smoke Shield for Arai XD4 Helmets – One Size - 0-day warranty. Arai tr 811104. Replacement brow vent shield for arai xd4 helmets.

 

Arai SAQ Base Plate Kit Set For RX-7 Corsair Profile Vector Quantums

Arai SAQ Base Plate Kit Set For RX-7 Corsair Profile Vector Quantums

Arai SAQ Base Plate Kit Set For RX-7 Corsair Profile Vector Quantums - Easy to install. Model fit see description. Set of 2, left and right. Part number 81-0179. Official arai product.

 

Arai Helmets Visor Screw Kit - Clear 2483

Arai Helmets Visor Screw Kit – Clear 2483

Arai Helmets Visor Screw Kit – Clear 2483 - 0-day warranty. Arai tr 811104. Visor screw kit for mxc-pro, vx-pro, vx-pro dc and vx-pro3 helmet.

 

Arai Helmets Shield Cover Set - Black Pearl 3501 020390

Arai Helmets Shield Cover Set – Black Pearl 3501 020390

Arai Helmets Shield Cover Set – Black Pearl 3501 020390 - Replacement helmet shield cover set sold in pairs replacement helmet shield cover set for astral, astral-x, profile, corsair v, quantum-2, rx7 corsair, rx-q and vector helmet.

 

Arai SK-6 2015 White Small

Arai SK-6 2015 White Small

Arai SK-6 2015 White Small - New positive shield locking mechanism. Wider eye port for increased peripheral vision. New shield pivot hardware with redesigned track slider for improved aerodynamics. Larger intake and exhaust holes for increased airflow (front vents are closeable). Arai 6 series 3mm thick visor (not interchangeable with sk-5.

 

Arai Signet-x Fluor Yel Xl

Arai Signet-x Fluor Yel Xl

Arai Signet-x Fluor Yel Xl - For more information, please visit manufacturer website at wwwaraiamericascom. All arai helmets meet or exceed snell and dot standards arai helmets are industry leading motorcycle helmets only helmet that comes in different fitment type, long-oval, round-oval and intermediate oval. All orders are processed and shipped on the same day when possible items are shipped from several warehouses to ensure quickest delivery time.

 

Arai SAi Super Adsis I type Helmet Visor Shield Rx7-RR5 CorsairV RX-Q Vector2 Signet2 Defiant Iridium

Arai SAi Super Adsis I type Helmet Visor Shield Rx7-RR5 CorsairV RX-Q Vector2 Signet2 Defiant (Iridium)

Arai SAi Super Adsis I type Helmet Visor Shield Rx7-RR5 CorsairV RX-Q Vector2 Signet2 Defiant (Iridium) - One size fits all size helmet. Comparable to arai super adsis i type shield. Aftermarket arai helmet shield. 100% protection from harmful uv a & b rays. Impact and scratch resistant.

 

Arai VAS-V MAX Vision Face Shield UNISEX

Arai VAS-V MAX Vision Face Shield (UNISEX)

Arai VAS-V MAX Vision Face Shield (UNISEX) - Arai alone has the experience, the quality, and the trust that truly set them apart replacement pinlock(r)-ready vas-v max vision face shield with tear-off posts for the arai corsair-x, quantum-x and signet-x helmets. The arai difference it’s the one you can see, feel, touch. Their name and reputation have been forged over time, the hard way. And trust the simple truth is, while there are a lot of helmets out there, there is still only one arai. Which means they haven’t devoted three generations of the arai family to the singular goal of no-holds-barred excellence just to turn out helmets like everybody else’s.

 

Arai 2370 Breath Mask

Arai 2370 Breath Mask

Arai 2370 Breath Mask - New chin vent incorporates expanded ss mesh moved from inside to outside of shell, provides room to move the eps chin liner forward for more room in the face area. Chin vent has mesh cap, round and smooth to resist snagging and digging in, easily removable with single screw and will break away if necessary in an impact. Meets or exceeds snell and dot standards. Arai 2370 breath mask. Larger relief ports to allow more air to escape from under the larger peak to minimize lift/pulling at speed.

 

Arai Pro Shade Shield System for RX-Q Defiant Corsair V Signet 2 Vector 2

Arai Pro Shade Shield System for RX-Q Defiant Corsair V Signet 2 Vector 2

Arai Pro Shade Shield System for RX-Q Defiant Corsair V Signet 2 Vector 2 - Part number 810479. Model fit see description. With the new pro shade system, arai now introduces a (patented) revolutionary solution to a well-known problem sun glare. Official arai product. It is nowadays quite common to use a retractable sun-visor that is situated between the helmet’s outer- and inner shell to protect against sun glare however, it’s arai’s opinion that this construction could affect the performance of a helmet during impact.

 

Arai RX-QCorsair V Faceshield - One Size

Arai RX-Q/Corsair V Faceshield – One Size

Arai RX-Q/Corsair V Faceshield – One Size - Available in clear, light smoke, dark smoke, silver, blue, gold and purple. For rx-q, corsair v helmets.